HardLabs

Brians GSM GPS ESP

Stevemwa·PCB_Designs·Brians_GSM_GPS_ESP_PCB/Brians_GSM_GPS_ESP_PCB.kicad_pcb

Brians GSM GPS ESP PCB layout, top view — open source ESP32 board by Stevemwa

About the Brians GSM GPS ESP PCB

Brians GSM GPS ESP is an open source ESP32 PCB design by Stevemwa, published on GitHub. It is a 2-layer board measuring 90 × 45 mm, with 12 components from 8 distinct parts.

Its main chip is the ESP-WROOM-32_USBC, from the ESP32 family. By type, the board carries 4 ICs, 2 connectors, 2 jumpers, 2 diodes and 2 capacitors.

It belongs with the rf & radio, iot & wireless and dev boards & breakouts designs in this gallery.

From the project

This Repo contains my various PCB Designs

Brians GSM GPS ESP, from the project README
From the project README

Brians GSM GPS ESP bill of materials (BOM)

12 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
~
U2
2
~
U3, U4
1
ESP-WROOM-32_USBC
J1
1
Screw_Terminal_01x02
J2
2
Jumper_2_Open
JP1, JP2
2
D
D1, D2
2
C
C1, C2

Brians GSM GPS ESP design files

The KiCad project lives in the Stevemwa/PCB_Designs repository on GitHub; these links point at the commit this page was built from.

Brians GSM GPS ESP: common questions

What microcontroller does the Brians GSM GPS ESP use?

The Brians GSM GPS ESP is built around the ESP-WROOM-32_USBC, from the ESP32 family.

How big is the Brians GSM GPS ESP PCB?

The Brians GSM GPS ESP measures 90 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Brians GSM GPS ESP?

12 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Brians GSM GPS ESP design files?

From the Stevemwa/PCB_Designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Brians GSM GPS ESP design in my own project?

The repository has no license, so all rights stay with Stevemwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Brians GSM GPS ESP without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB_Designs

Similar boards