3V3 2A buck TPS54202
SteynGuelen·kicad_lib·design_blocks/powersupplies.kicad_blocks/3V3_2A_buck_TPS54202.kicad_block/3V3_2A_buck_TPS54202.kicad_pcb
About the 3V3 2A buck TPS54202 PCB
3V3 2A buck TPS54202 is an open source PCB design by SteynGuelen, published on GitHub. It is a 4-layer board measuring 6.4 × 11.7 mm, with 11 components from 8 distinct parts.
Other key parts include the TPS54202DDC. By type, the board carries 7 capacitors, 2 resistors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Custom symbols, footprints, 3D models, drawing sheets, and reusable design blocks by Steyn Guelen.
Custom symbols, footprints, 3D models, drawing sheets, and reusable design blocks by Steyn Guelen.
Use KiCad 10 or newer for the complete collection. Some files were saved with KiCad 10; older versions may not open all assets. Git is optional if you download a ZIP instead.
1. Clone this repository into a permanent location:
Alternatively, choose Code → Download ZIP on GitHub and extract it.
Main components on the 3V3 2A buck TPS54202
3V3 2A buck TPS54202 bill of materials (BOM)
11 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54202DDC | SOT-23-6 | U4 |
| 1 | 4.7uH | L_Changjiang_FXL0530 | L8 |
| 1 | 1uF | Capacitor_0603 | C19 |
| 1 | 100nF | Capacitor_0402 | C20 |
| 1 | 47pF | Capacitor_0402 | C21 |
| 4 | 22uF | Capacitor_0603 | C22, C23, C24, C25 |
| 1 | 100k | Resistor_0402 | R19 |
| 1 | 22k | Resistor_0402 | R20 |
3V3 2A buck TPS54202 design files
The KiCad project lives in the SteynGuelen/kicad_lib repository on GitHub; these links point at the commit this page was built from.
3V3 2A buck TPS54202: common questions
How big is the 3V3 2A buck TPS54202 PCB?
The 3V3 2A buck TPS54202 measures 6.4 × 11.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 3V3 2A buck TPS54202?
11 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3V3 2A buck TPS54202 design files?
From the SteynGuelen/kicad_lib repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3V3 2A buck TPS54202 design in my own project?
The repository has no license, so all rights stay with SteynGuelen. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k