Robot-Tour-Beter-2025
Stuyoly-Tech·Robot-Tour-Beter-2025·Electronics V2/Electronics V2.kicad_pcb
About the Robot-Tour-Beter-2025 PCB
Robot-Tour-Beter-2025 is an open source ESP32 PCB design by Stuyoly-Tech, published on GitHub. It is a 2-layer board measuring 102 × 62 mm, with 86 components from 41 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the NCP1117-3.3_SOT223, TMC2209, DAC081C081CIMK, IMU_L and IMU_R. By type, the board carries 27 capacitors, 24 resistors, 11 ICs, 8 switches, 7 connectors and 6 diodes.
It belongs with the robotics & motion designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Better Peter
Main components on the Robot-Tour-Beter-2025
Robot-Tour-Beter-2025 bill of materials (BOM)
86 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U1, U7 |
| 2 | TMC2209 | QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm | U2, U9 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U3 |
| 1 | DAC081C081CIMK | SOT-23-6 | U4 |
| 1 | IMU_L | Bosch_LGA-14_3x2.5mm_P0.5mm | U5 |
| 1 | IMU_R | Bosch_LGA-14_3x2.5mm_P0.5mm | U6 |
| 1 | SSD1036 | PinHeader_1x04_P2.54mm_Vertical | U8 |
| 2 | TVS1400DRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U10, U11 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | MOT_L | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J1 |
| 1 | MOT_R | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J2 |
| 1 | SD_Card | SD_Hirose_DM1AA_SF_PEJ82 | J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4110 | J4 |
| 1 | Power Probes | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | L1 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J6 |
| 1 | L2 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J7 |
| 1 | Battery | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | BT1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | BTN_0 | SW_SPST_PTS645 | SW1 |
| 1 | MSTP_SEL | SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RST | SW_Push_1P1T_NO_CK_KMR2 | SW3 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW4 |
| 1 | BTN_1 | SW_SPST_PTS645 | SW5 |
| 1 | BTN_2 | SW_SPST_PTS645 | SW6 |
| 1 | BTN_3 | SW_SPST_PTS645 | SW7 |
| 1 | INCR_0 | RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW8 |
| 1 | STATUS_LED | LED_0603_1608Metric | D1 |
| 1 | D_Schottky | TO-277A | D2 |
| 1 | LED_0 | LED_0603_1608Metric | D3 |
| 1 | LED_SD | LED_0603_1608Metric | D4 |
| 1 | LED_3V3 | LED_0603_1608Metric | D5 |
| 1 | LED_5V | LED_0603_1608Metric | D6 |
| 17 | 100n | C_0603_1608Metric | C1, C2, C3, C5, C6, C7, C10, C11 +9 |
| 2 | 100u | CP_EIA-7343-30_AVX-N | C4, C9 |
| 2 | 22n | C_0603_1608Metric | C8, C25 |
| 4 | 10u | C_0603_1608Metric | C19, C20, C21, C22 |
| 2 | 10n | C_0603_1608Metric | C26, C27 |
| 15 | 10k | R_0603_1608Metric | R1, R2, R3, R9, R10, R11, R13, R14 +7 |
| 4 | 330m | R_0603_1608Metric | R4, R5, R8, R20 |
| 4 | 1k | R_0603_1608Metric | R12, R21, R22, R23 |
| 1 | 1.5k | R_0603_1608Metric | R24 |
Robot-Tour-Beter-2025 design files
The KiCad project lives in the Stuyoly-Tech/Robot-Tour-Beter-2025 repository on GitHub; these links point at the commit this page was built from.
Robot-Tour-Beter-2025: common questions
What microcontroller does the Robot-Tour-Beter-2025 use?
The Robot-Tour-Beter-2025 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Robot-Tour-Beter-2025 PCB?
The Robot-Tour-Beter-2025 measures 102 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robot-Tour-Beter-2025?
86 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robot-Tour-Beter-2025 design files?
From the Stuyoly-Tech/Robot-Tour-Beter-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Robot-Tour-Beter-2025 design in my own project?
The repository has no license, so all rights stay with Stuyoly-Tech. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robot-Tour-Beter-2025 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Earlier revisions in the repo: Electronics
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k