Esp12s aq hw
subraizada3·esp12s-aq-hw
About the Esp12s aq hw PCB
Esp12s aq hw is an open source ESP8266 PCB design by subraizada3, published on GitHub. It is a 2-layer board measuring 37.1 × 36.8 mm, with 19 components from 15 distinct parts.
Its main chip is the ESP-12S, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 fuse and 1 diode.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
This is a board that powers an ESP-12S module with USB-C, and has breakouts for I2C and UART.
This is a board that powers an ESP-12S module with USB-C, and has breakouts for I2C and UART.
Designed for use as an air quality sensor in combination with:
- Sensirion SCD41 (high accuracy NDIR CO2) - available on an I2C breakout board from various manufacturers - Sensirion SGP40 (VOC) - available on an I2C breakout board from various manufacturers - Sensirion SPS30 (particulate matter) - Sensirion manufactures an eval kit that comes with a cable, Sparkfun also sells their own similar kit

Main components on the Esp12s aq hw
Esp12s aq hw bill of materials (BOM)
19 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP-12S | ESP-12S | U2 |
| 1 | TYPE-C-31-M-17 USB-C | M17 | J1 |
| 1 | HDR-TH_8P-P2.54-V-R2-C4-S2.54 SCD41 CO2 / SGP40 VOC | PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | HDR-TH_8P-P2.54-V SPS30 PM | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | HDR-TH_8P-P2.54-V-R2-C4-S2.54 TTL Serial | PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | NSMD100-13.2V 1A hold | Fuse_1206_3216Metric | F1 |
| 1 | KT-0603R LED | LED_0603_1608Metric | D1 |
| 2 | CL05A105KA5NQNC 1uF | C_0402_1005Metric | C1, C6 |
| 3 | CL05A106MQ5NUNC 10uF | C_0402_1005Metric | C2, C3, C4 |
| 1 | CL05B104KO5NNNC 0.1uF | C_0402_1005Metric | C5 |
| 2 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 0402WGF100KTCE 1 | R_0402_1005Metric | R3 |
| 1 | 1206W4F3000T5E 270-330 | R_1206_3216Metric | R4 |
| 1 | 0402WGF1001TCE 1k | R_0402_1005Metric | R5 |
Esp12s aq hw design files
The KiCad project lives in the subraizada3/esp12s-aq-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutairsensor.kicad_pcb
- BOMproducts/bom.xlsx
Esp12s aq hw: common questions
What microcontroller does the Esp12s aq hw use?
The Esp12s aq hw is built around the ESP-12S, from the ESP8266 family.
How big is the Esp12s aq hw PCB?
The Esp12s aq hw measures 37.1 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp12s aq hw?
19 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp12s aq hw design files?
From the subraizada3/esp12s-aq-hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Esp12s aq hw design in my own project?
The repository has no license, so all rights stay with subraizada3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp12s aq hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398