Atego Nano
sudo-junkie·Atego_Nano·SRC/Atego_Nano.kicad_pcb
About the Atego Nano PCB
Atego Nano is an open source AVR/Arduino PCB design by sudo-junkie, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 35.3 × 42.6 mm, with 75 components from 43 distinct parts.
Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the USBLC6-2P6-ES, TPS61252DSGR, AP3211KTR-G1, BQ24012DRCR and CH340E. By type, the board carries 23 resistors, 22 capacitors, 12 diodes, 6 ICs, 4 connectors and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Arduino Nano clone with on-board battery charging and addressable LEDs
KiCad 7 design files (schematic, PCB, gerber, BOM) for an Arduino Nano clone, with the following additional features: - Single cell lithium battery charger - VIN upto 15V - USB C - RGB LEDs

Main components on the Atego Nano
Atego Nano bill of materials (BOM)
75 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6-ES USBLC6-2P6 ElecSuper | SOT-666 | U101 |
| 1 | TPS61252DSGR TPS61252DSG Texas Instruments | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U301 |
| 1 | AP3211KTR-G1 AP3211K Diodes Incorporated | SOT-23-6 | U401 |
| 1 | BQ24012DRCR BQ24012 Texas Instruments | VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U501 |
| 1 | ATMEGA328P-AU ATmega328P-A Microchip Tech | TQFP-32_7x7mm_P0.8mm | U601 |
| 1 | CH340E WCH(Jiangsu Qin Heng) | MSOP-10_3x3mm_P0.5mm | U701 |
| 2 | AO3401CI-MS AO3401A MSKSEMI | SOT-23 | Q201, Q202 |
| 1 | TJ2116000UYGBC 16MHz JYJE | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y601 |
| 1 | TYPE-C 24P QT 143 USB_C_Receptacle_USB2.0 SHOU HAN | USB_C_Receptacle_JAE_DX07S016JA1R1500 | J101 |
| 1 | B-2100S15P-A110 Conn_L Ckmtw(Shenzhen Cankemeng) | PinHeader_1x15_P2.54mm_Vertical | J601 |
| 1 | B-2100S15P-A110 Conn_R Ckmtw(Shenzhen Cankemeng) | PinHeader_1x15_P2.54mm_Vertical | J602 |
| 1 | PH-01291 Conn_ICSP Liansheng | PinHeader_2x03_P2.54mm_Vertical | J603 |
| 1 | MF-MSMF050-2 500mA BOURNS | R_1812_4532Metric | F101 |
| 1 | B3U-1000P SW_RST Omron Electronics | SW_SPST_B3U-1000P | SW601 |
| 3 | ES3AF ES3A-ES3J Shandong Jingdao Microelectronics | D_SOD-323 | D101, D202, D401 |
| 1 | XL-1005SURC LED_PWR XINGLIGHT | LED_0402_1005Metric | D201 |
| 1 | BZX584C11V 11V Yangzhou Yangjie Elec Tech | D_SOD-523 | D203 |
| 1 | XL-1005SURC LED_R XINGLIGHT | LED_0402_1005Metric | D501 |
| 1 | XL-1005UGC LED_G XINGLIGHT | LED_0402_1005Metric | D502 |
| 2 | XL-2020RGBC-WS2812B WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D601, D602 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XL-1005UBC LED_USB_ACT XINGLIGHT | LED_0402_1005Metric | D701 |
| 1 | XL-1005UOC LED_TX XINGLIGHT | LED_0402_1005Metric | D702 |
| 1 | XL-1005UOC LED_RX XINGLIGHT | LED_0402_1005Metric | D703 |
| 1 | HPZ1608D221-1R5TF 220R@100MHz 1.5A Sunlord | L_0603_1608Metric | FB101 |
| 1 | PSPNAQ4018-1R0M 1u PROD Tech | L_Vishay_IFSC-1515AH_4x4x1.8mm | L301 |
| 1 | PSPMAA0402-4R7M-ANP 4u7 PROD Tech | L_Sunlord_MWSA0402S | L401 |
| 5 | CC0603KRX7R6BB105 1u 10% 10V YAGEO | C_0603_1608Metric | C101, C102, C602, C605, C606 |
| 1 | CC0603FRNPO9BN101 100p 1% 50V YAGEO | C_0603_1608Metric | C301 |
| 2 | CC0603MRX5R8BB106 10u 20% 25V YAGEO | C_0603_1608Metric | C302, C402 |
| 2 | CC0603MRX5R6BB226 22u 20% 10V YAGEO | C_0603_1608Metric | C303, C403 |
| 1 | CC0603KRX7R6BB103 10n 10% 10V YAGEO | C_0603_1608Metric | C401 |
| 6 | CC0603KRX7R6BB104 100n 10% 10V YAGEO | C_0603_1608Metric | C501, C601, C603, C604, C701, C702 |
| 1 | CC0603KRX7R7BB474 470n 10% 16V YAGEO | C_0603_1608Metric | C502 |
| 2 | CC0603FRNPO9BN220 22p 1% 50V YAGEO | C_0603_1608Metric | C607, C608 |
| 2 | CC0402JRX7R6BB104 100n 10V 5% | C_0402_1005Metric | C609, C610 |
| 2 | RC0603JR-075K1L 5K1 5% YAGEO | R_0603_1608Metric | R101, R102 |
| 11 | RT0603BRD071KL 1K 0.1% YAGEO | R_0603_1608Metric | R201, R501, R502, R503, R602, R603, R604, R605 +3 |
| 4 | RT0603BRD0710KL 10K 0.1% YAGEO | R_0603_1608Metric | R202, R203, R303, R601 |
| 1 | PTFR0603B768KP9 768K Resistor.Today | R_0603_1608Metric | R301 |
| 1 | RT0603BRD07243KL 243K YAGEO | R_0603_1608Metric | R302 |
| 1 | RT0603BRD07180KL 180K 0.1% YAGEO | R_0603_1608Metric | R401 |
| 1 | RT0603BRD0733KL 33K YAGEO | R_0603_1608Metric | R402 |
| 2 | RC0603JR-07470RL 470R 5% YAGEO | R_0603_1608Metric | R702, R703 |
Atego Nano design files
The KiCad project lives in the sudo-junkie/Atego_Nano repository on GitHub; these links point at the commit this page was built from.
- LayoutSRC/Atego_Nano.kicad_pcb
- SchematicSRC/Atego_Nano.kicad_sch
Atego Nano: common questions
What microcontroller does the Atego Nano use?
The Atego Nano is built around the ATMEGA328P-AU, from the AVR/Arduino family.
How big is the Atego Nano PCB?
The Atego Nano measures 35.3 × 42.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Atego Nano?
75 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Atego Nano design files?
From the sudo-junkie/Atego_Nano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Atego Nano design in my own project?
Yes, under the terms of its GPL-2.0 license, which sudo-junkie chose for the repository.
Can I test firmware for the Atego Nano without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k