6 open source boards using the AP3211KTR-G1
Real designs built with the AP3211KTR-G1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Transponder-12.0.1
peterantypas
90.4 × 25 mm115 parts4LGPL-3.0446NXP
Interface brain
ademuri
154.5 × 105 mm170 parts2LApache-2.04AVR/Arduino
Atego Nano
sudo-junkie
35.3 × 42.6 mm75 parts2LGPL-2.00STM32
Transponder-11.9.1
peterantypas
84 × 25 mm109 parts4LGPL-3.0446STM32
NMEA2000Adapter-8.1
peterantypas
46 × 46 mm52 parts2LGPL-3.0446NMEA0183Adapter-7.1
peterantypas
52 × 42 mm39 parts2LGPL-3.0446
The AP3211KTR-G1 in open source designs
The gallery holds 6 open source boards using the AP3211KTR-G1 from 3 GitHub repositories; a typical one measures about 68 × 42.3 mm and carries around 92 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Transponder-12.0.1 by peterantypas.
Microcontrollers on boards using the AP3211KTR-G1
What boards using the AP3211KTR-G1 are built for
AP3211KTR-G1: common questions
Where can I find a AP3211KTR-G1 reference design?
Each of the 6 boards on this page is a real design using the AP3211KTR-G1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP3211KTR-G1 use?
Most are built on STM32 (3), AVR/Arduino (1) and NXP (1).
How big is a typical board using the AP3211KTR-G1?
The median is 68 × 42.3 mm, and 67% are two-layer designs.
What is the most popular open source board using the AP3211KTR-G1?
By GitHub stars, Transponder-12.0.1 by peterantypas, with 446 stars.
Can I simulate one of these boards using the AP3211KTR-G1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.