USB-Powered-ATtiny85-Development-Board
sujitkumar05-pcb·USB-Powered-ATtiny85-Development-Board
About the USB-Powered-ATtiny85-Development-Board
USB-Powered-ATtiny85-Development-Board is an open source AVR/Arduino PCB design by sujitkumar05-pcb, published on GitHub. It is a 2-layer board measuring 50 × 30 mm, with 18 components from 14 distinct parts.
Its main chip is the ATtiny85-20S, from the AVR/Arduino family. Other key parts include the L78L05. By type, the board carries 5 diodes, 5 resistors, 3 connectors, 3 capacitors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Compact PCB design for the ATtiny85 microcontroller 🔌 Powered directly via USB for easy prototyping 🛠️ Includes schematic and PCB layout files (designed in KiCad) 🧩 Suitable for DIY electronics, embedded systems, and microcontroller projects 🧷 Minimalist design focused on simplicity and low power consumption 📂 Ready for fabrication and as
The USB-Powered ATtiny85 Development Board is a compact and low-cost microcontroller development platform designed for quick prototyping and learning purposes. It is based on the ATtiny85, an 8-bit AVR microcontroller, and can be powered directly through a USB interface, eliminating the need for an external power supply.
This board is intended to simplify development by providing easy access to essential pins, stable power regulation, and support for programming via commonly used USB-based programmers. Its small form factor makes it ideal for embedded applications, wearable electronics, and…
Main components on the USB-Powered-ATtiny85-Development-Board
USB-Powered-ATtiny85-Development-Board bill of materials (BOM)
18 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L78L05 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ATtiny85-20S | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | Conn_01x03_Pin | FanPinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | USB Micro | USB_A_CNCTech_1001-011-01101_Horizontal | J2 |
| 1 | Conn_01x06_Pin | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | BZT52C36 | D_SOD-123F | D2, D3 |
| 2 | LED | LED_1210_3225Metric | D4, D5 |
| 1 | 1uF | C_1210_3225Metric | C1 |
| 1 | 4.7uF | C_1210_3225Metric | C2 |
| 1 | 0.1uF | C_1210_3225Metric | C3 |
| 1 | 1K | R_1210_3225Metric | R1 |
| 2 | 66.5R | R_1218_3246Metric | R2, R3 |
| 2 | 1K | R_1218_3246Metric | R4, R5 |
USB-Powered-ATtiny85-Development-Board design files
The KiCad project lives in the sujitkumar05-pcb/USB-Powered-ATtiny85-Development-Board repository on GitHub; these links point at the commit this page was built from.
USB-Powered-ATtiny85-Development-Board: common questions
What microcontroller does the USB-Powered-ATtiny85-Development-Board use?
The USB-Powered-ATtiny85-Development-Board is built around the ATtiny85-20S, from the AVR/Arduino family.
How big is the USB-Powered-ATtiny85-Development-Board?
The USB-Powered-ATtiny85-Development-Board measures 50 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-Powered-ATtiny85-Development-Board?
18 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-Powered-ATtiny85-Development-Board design files?
From the sujitkumar05-pcb/USB-Powered-ATtiny85-Development-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB-Powered-ATtiny85-Development-Board design in my own project?
The repository has no license, so all rights stay with sujitkumar05-pcb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the USB-Powered-ATtiny85-Development-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k