26 open source boards using the L78L05
Real designs built with the L78L05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ES688 ISA8
hkzlab
104.1 × 99.1 mm121 parts4LCC-BY-NC-4.046Multiplexer-8
polykit
44 × 102 mm23 parts2LNo license4Sam17-vco
sssamuelll
114 × 124 mm129 parts4LCERN-OHL-S-2.024op drum module rev2
vk2gpu
99.1 × 99.1 mm117 parts2LNo license2FPGA
AsD Preamp Digital Preamplifier
djupdal
130 × 140 mm271 parts4LNo license1Sam17-vco
sssamuelll
114 × 124 mm129 parts4LCERN-OHL-S-2.01Solstrejf voiceboard core
KamikazeVildsvin
119.4 × 83.8 mm123 parts2LGPL-3.0116bit pwm dac board
oldrev
80 × 50 mm54 parts2LNo license1AVR/Arduino
Ps2 mouse to serial port adapter in a box
knightfox75
90 × 70 mm24 parts2LMIT1ESP32
Field eyes
louismomo66
118.3 × 68 mm162 parts2LNo license0Chb inverter
feaksel
209.6 × 120.7 mm95 parts2LApache-2.00RP2040/RP2350
Ghost fader
chris-albert
108 × 80 mm82 parts2LNo license0AVR/Arduino
USB-Powered-ATtiny85-Development-Board
sujitkumar05-pcb
50 × 30 mm18 parts2LNo license0AVR/Arduino
Autostop killer
kubiq
33 × 34 mm8 parts2LMIT0Panel
vk2gpu
99.1 × 99.1 mm117 parts2LNo license2Sam17-power v3
sssamuelll
200 × 150 mm97 parts2LCERN-OHL-S-2.02Sam17-power v3
sssamuelll
200 × 150 mm97 parts2LCERN-OHL-S-2.01AVR/Arduino
Ps2 mouse to serial port adapter stand alone
knightfox75
90 × 70 mm23 parts2LMIT1RP2040/RP2350
Ghost fader narrow
chris-albert
207 × 38 mm82 parts2LNo license0Eurorack SSI2131 VCO
Len42
50.5 × 108.2 mm98 parts2LNo license50Backup1
vk2gpu
102.9 × 92.7 mm101 parts2LNo license2AVR/Arduino
Ps2 mouse to serial port adapter ISA card
knightfox75
103.8 × 87.8 mm17 parts2LMIT1High Torque Servo Arm: Servo
akornsys-rdi
25 × 47 mm14 parts2LGPL-3.00DelSol Voice
dzavalishin
110.5 × 32.4 mm69 parts2LNo license3DelSol Voice 2
dzavalishin
114.9 × 35.6 mm64 parts2LNo license3DelSol PSU
dzavalishin
122.6 × 50.8 mm61 parts2LNo license3
How designs wire the L78L05
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the L78L05 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF (then 1 µF).
- The VO pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VOpin 1 | Connected to: 5V 71% · a signal 29% |
|
| GNDpin 2 | Connected to: GND 92% | — |
| VIpin 3 | Connected to: 12V 41% · a signal 35% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Eurorack SSI2131 VCO by Len42, ES688 ISA8 by hkzlab, Multiplexer-8 by polykit and DelSol PSU by dzavalishin.
The L78L05 in open source designs
The gallery holds 26 open source boards using the L78L05 from 17 GitHub repositories; a typical one measures about 106.1 × 85.8 mm and carries around 89 components.
85% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is Eurorack SSI2131 VCO by Len42.
Parts used alongside the L78L05
Microcontrollers on boards using the L78L05
What boards using the L78L05 are built for
L78L05: common questions
Where can I find a L78L05 reference design?
Each of the 26 boards on this page is a real design using the L78L05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the L78L05 VI pin?
The VI pin has a decoupling capacitor on 9 of 17 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 17 open source designs using the L78L05.
What decoupling capacitors do designs use on the L78L05 VO pin?
The VO pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the L78L05.
What parts are used alongside the L78L05?
The 74HC14, L79L05, 24AA02E48, AD5686RBRUZ and ADR4525BRZ appear in the most repositories here.
Which microcontrollers do boards using the L78L05 use?
Most are built on AVR/Arduino (5), RP2040/RP2350 (2), ESP32 (1) and FPGA (1).
How big is a typical board using the L78L05?
The median is 106.1 × 85.8 mm, and 85% are two-layer designs.
What is the most popular open source board using the L78L05?
By GitHub stars, Eurorack SSI2131 VCO by Len42, with 50 stars.
Can I simulate one of these boards using the L78L05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.