Garden microcontroller
Sunewst·garden-microcontroller·Garden-MUX/Garden-MUX.kicad_pcb
About the Garden microcontroller PCB
Garden microcontroller is an open source ESP32 PCB design by Sunewst, published on GitHub under the MIT license. It is a 2-layer board measuring 46 × 46 mm, with 52 components from 21 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the MCP73832-2-OT and AP2112K-3.3. By type, the board carries 17 resistors, 13 capacitors, 10 switches, 4 ICs, 3 connectors and 3 diodes.
It belongs with the power & battery designs in this gallery.
From the project
A microcontroller designed for use in garden projects in mind. Deep-Sleep compatible MUX/I2C ports, Li-Po battery power option, SD card reader, and easier chain ability of multiple boards.
Main components on the Garden microcontroller
Garden microcontroller bill of materials (BOM)
52 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U1 |
| 1 | MCP73832-2-OT | SOT-23-5 | U2 |
| 2 | AP2112K-3.3 | SOT-23-5 | U3, U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | SDCARD_MODULE | SDCARD_MODULE_Footprint | J2 |
| 1 | S2B-PH-SM4-TB | JST_S2B-PH-SM4-TB | P1 |
| 8 | ~ | STEMMAQWIIC_Footprint | S1, S2, S3, S4, S5, S6, S7, S8 |
| 2 | TL6330AF200Q | SW_TL6330AF200Q_Footprint | S9, S10 |
| 1 | ~ | TCA9548A_Footprint | TCA9548A1 |
| 2 | LED | LED_0603_1608Metric | D1, D3 |
| 1 | D | D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2 |
| 4 | 1.0 uF | C_0603_1608Metric | C1, C2, C3, C4 |
| 2 | 1 | C_0603_1608Metric | C5, C6 |
| 2 | 0.1 uF | C_0603_1608Metric | C7, C8 |
| 5 | 10 | C_0603_1608Metric | C9, C10, C11, C12, C13 |
| 3 | 5.1k | R_0603_1608Metric | R1, R10, R11 |
| 1 | 100k | R_0603_1608Metric | R2 |
| 6 | 47k | R_0603_1608Metric | R3, R5, R6, R7, R8, R9 |
| 5 | 4.7k | R_0603_1608Metric | R4, R13, R14, R15, R16 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100k | R_0805_2012Metric | R12, R17 |
Garden microcontroller design files
The KiCad project lives in the Sunewst/garden-microcontroller repository on GitHub; these links point at the commit this page was built from.
Garden microcontroller: common questions
What microcontroller does the Garden microcontroller use?
The Garden microcontroller is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Garden microcontroller PCB?
The Garden microcontroller measures 46 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Garden microcontroller?
52 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Garden microcontroller design files?
From the Sunewst/garden-microcontroller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Garden microcontroller design in my own project?
Yes, under the terms of its MIT license, which Sunewst chose for the repository.
Can I test firmware for the Garden microcontroller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k