68uino
SunnyYoshimitsu·68uino·68uino/68uino.kicad_pcb
About the 68uino PCB
68uino is an open source AVR/Arduino PCB design by SunnyYoshimitsu, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 24 components from 15 distinct parts.
Its main chip is the Arduino_Uno_R3_SMD_Shield, from the AVR/Arduino family. Other key parts include the HD6303, 27C256, 74LS373 and NE555P. By type, the board carries 7 resistors, 6 capacitors, 4 ICs, 3 diodes, 1 module and 1 switch.
It belongs with the keyboards designs in this gallery.
From the project
6800-based single board computer in an Arduino form-factor.
I started the project sometime after watching a video by Ander Nielson (link below) and got the idea of making something similar.
Inspiration: https://www.youtube.com/watch?v=s3t2QMukBRs&t=563s&ab_channel=AndersNielsen
However, since he already did the 6502, I decided to use a different processor to challenge myself. Whilst browsing through Jamesco, I found the 6802, a 6800-based CPU. It was very similar to the 6502 due to being designed by the same engineers and most importantly, it had built-in RAM. Doing more research left me with the HD6303 which was the same as the 6202 except with…
Main components on the 68uino
68uino bill of materials (BOM)
24 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HD6303 | DIP-40_W15.24mm_LongPads | U1 |
| 1 | 27C256 | DIP-28_W15.24mm | U2 |
| 1 | 74LS373 | DIP-20_W7.62mm_LongPads | U4 |
| 1 | NE555P | DIP-8_W7.62mm | U5 |
| 1 | Arduino_Uno_R3_SMD_Shield | Arduino_6802_Shield | A1 |
| 1 | Crystal | Crystal_HC18-U_Vertical | 4MHz1 |
| 1 | SW_Push | SW_PUSH_6mm | SW2 |
| 1 | USB_C_1 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB_C_ESP1 |
| 1 | 1N4007 | D_A-405_P7.62mm_Horizontal | D1 |
| 2 | LED | LED_D3.0mm | D2, D3 |
| 2 | 22pF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2 |
| 3 | .1uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C3, C5, C6 |
| 1 | 10uF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 6 | 5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7 |
68uino design files
The KiCad project lives in the SunnyYoshimitsu/68uino repository on GitHub; these links point at the commit this page was built from.
- Layout68uino/68uino.kicad_pcb
- Schematic68uino/68uino.kicad_sch
68uino: common questions
What microcontroller does the 68uino use?
The 68uino is built around the Arduino_Uno_R3_SMD_Shield, from the AVR/Arduino family.
How big is the 68uino PCB?
The 68uino measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 68uino?
24 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the 68uino design files?
From the SunnyYoshimitsu/68uino repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 68uino design in my own project?
The repository has no license, so all rights stay with SunnyYoshimitsu. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 68uino without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k