50 open source boards using the 27C256
Real designs built with the 27C256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120Isa super vga
skiselev
104.1 × 87.6 mm62 partsNo license81Tipi peb
jedimatt42
237.7 × 146.1 mm47 parts2LGPL-3.076Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69CGA Redux
hkzlab
337.6 × 105.7 mm168 parts4LCC-BY-NC-4.056TRS-80 Color Computer 3
qbancoffee
280 × 156.3 mm205 parts2LGPL-3.040Mgh80
Kris-Sekula
100 × 100 mm32 parts2LNo license34Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license32PIC
C64-Kernal-Switcher
tebl
20.3 × 47.6 mm12 parts2LCERN-OHL-1.232- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 Radio-86rk rom
skiselev
50.8 × 30.5 mm7 parts2LGPL-3.017Coleco original
sparkletron
168.4 × 214 mm218 parts2LMIT16AVR/Arduino
CortexPC
danwerner21
244 × 244 mm155 parts2LNo license7Vhd if c9d
popolonx
145 × 120 mm72 parts2LNo license7TI99-4A-internal-TIPI
lucedoriente
100 × 56.5 mm32 parts2LGPL-3.06REF1011-Sega-GameGear-Pro-Action-Replay
RWeick
59.6 × 65.9 mm18 parts2LGPL-3.05Yamaha msx minicart
qoq
99.9 × 99 mm7 parts2LAGPL-3.05Dragon32Rev3
jimbro1000
253 × 169.1 mm169 parts2LMIT3JC2 v4.1
Emile666
233.7 × 160 mm120 parts2LNo license3Tinyfs
sittner
69.9 × 96.1 mm37 parts2LGPL-3.036809PC
danwerner21
244 × 244 mm155 parts2LNo license2JFF
herraa1
250 × 150 mm132 parts2LGPL-3.02Cardshark
slobworks
237 × 70.5 mm75 parts4LMIT2Cpu8085
hotkeysoft
100 × 100 mm30 parts2LNo license2C64NIKI2
ibaldachini
58.4 × 84.8 mm27 parts2LNo license26502PC
danwerner21
244 × 244 mm154 parts2LNo license1RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1RP2040/RP2350
EVA1 v2
roberto314
218 × 125 mm141 parts2LNo license0USB CopyNES
famicomical
88.8 × 114.5 mm34 parts2LNo license0AVR/Arduino
68uino
SunnyYoshimitsu
68.6 × 53.3 mm24 parts2LNo license0Tkmem128-ii
lrrosa
78.7 × 66 mm19 parts4LCERN-OHL-S-2.0086rk rom
Vakon84
50.8 × 30.5 mm7 parts2LGPL-3.00PC-KHARON-386-TOP
UzixLS
100 × 100 mm149 parts4LCC-BY-SA-4.0111SS-TIPI - TI-99/4A to RPi adapter for Speech Synth. Case
jedimatt42
115.7 × 56 mm33 parts2LGPL-3.076TRS-80 Color Computer 2 NTSC ( 26-3134B & 26-3136B)
qbancoffee
230 × 170 mm150 parts2LGPL-3.040
How designs wire the 27C256
Read from the KiCad layouts of 43 open source designs, one per repository: what each pin of the 27C256 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 43 designs, most often 100 nF (then 100 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 88% | — |
| VCCpin 28 | Connected to: 5V 83% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TRS-80 Color Computer 3 by baldengineer, NuXT by monotech, PC-KHARON-386-TOP by UzixLS and Isa super vga by skiselev.
The 27C256 in open source designs
The gallery holds 50 open source boards using the 27C256 from 44 GitHub repositories; a typical one measures about 145 × 100.3 mm and carries around 65 components.
81% are two-layer designs, the rest use four layers or more, and 48% carry an open source license.
The most starred is TRS-80 Color Computer 3 by baldengineer.
Parts used alongside the 27C256
Microcontrollers on boards using the 27C256
What boards using the 27C256 are built for
27C256: common questions
Where can I find a 27C256 reference design?
Each of the 50 boards on this page is a real design using the 27C256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 27C256 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 43 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 43 open source designs using the 27C256.
What parts are used alongside the 27C256?
The 74LS04, 74LS138, 74LS244, 74LS32 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 27C256 use?
Most are built on AVR/Arduino (2), PIC (2) and RP2040/RP2350 (2).
How big is a typical board using the 27C256?
The median is 145 × 100.3 mm, and 81% are two-layer designs.
What is the most popular open source board using the 27C256?
By GitHub stars, TRS-80 Color Computer 3 by baldengineer, with 442 stars.
Can I simulate one of these boards using the 27C256 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.