2 open source boards using the Arduino_Uno_R3_SMD_Shield

Real designs built with the Arduino_Uno_R3_SMD_Shield, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The Arduino_Uno_R3_SMD_Shield in open source designs

The gallery holds 2 open source boards using the Arduino_Uno_R3_SMD_Shield from 2 GitHub repositories; a typical one measures about 63.5 × 48.8 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is FNMES-Technical-Guide by ThemisEfth.

Microcontrollers on boards using the Arduino_Uno_R3_SMD_Shield

What boards using the Arduino_Uno_R3_SMD_Shield are built for

Arduino_Uno_R3_SMD_Shield: common questions

Where can I find a Arduino_Uno_R3_SMD_Shield reference design?

Each of the 2 boards on this page is a real design using the Arduino_Uno_R3_SMD_Shield. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the Arduino_Uno_R3_SMD_Shield use?

Most are built on AVR/Arduino (2).

How big is a typical board using the Arduino_Uno_R3_SMD_Shield?

The median is 63.5 × 48.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the Arduino_Uno_R3_SMD_Shield?

By GitHub stars, FNMES-Technical-Guide by ThemisEfth, with 0 stars.

Can I simulate one of these boards using the Arduino_Uno_R3_SMD_Shield before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part