HardLabs

Cubesat Drone Main hardware

SunnyYoshimitsu·Reconfigurable-Space-Compute-Cluster·Main Flight Computer/Cubesat Drone Main hardware/Cubesat Drone Main hardware.kicad_pcb

Cubesat Drone Main hardware PCB layout, top view — open source board by SunnyYoshimitsu
Simulate this board

About the Cubesat Drone Main hardware PCB

Cubesat Drone Main hardware is an open source PCB design by SunnyYoshimitsu, published on GitHub. It is a 2-layer board measuring 91.5 × 91.5 mm, with 4 components from 1 distinct parts.

It belongs with the rf & radio, robotics & motion and science & space designs in this gallery.

From the project

Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.

IO-SDR is an open-source software-defined FPGA radio hardware platform that serves as a successor to the Pluto SDR Learning Module. Support includes and is not limited to:

- dual multichannel transmission and reception - Gigabit Ethernet connection - Embedded Linux SoC development - GNU Radio blocks

Cubesat Drone Main hardware, from the project README
From the project README

Cubesat Drone Main hardware bill of materials (BOM)

4 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
Conn_01x02_Pin
J201, J202, J203, J204

Cubesat Drone Main hardware design files

The KiCad project lives in the SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster repository on GitHub; these links point at the commit this page was built from.

Cubesat Drone Main hardware: common questions

How big is the Cubesat Drone Main hardware PCB?

The Cubesat Drone Main hardware measures 91.5 × 91.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cubesat Drone Main hardware?

4 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cubesat Drone Main hardware design files?

From the SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cubesat Drone Main hardware design in my own project?

The repository has no license, so all rights stay with SunnyYoshimitsu. Use it as a reference, and ask the author before reusing the design.

More boards in Reconfigurable-Space-Compute-Cluster

Similar boards