Attempt2
supermileage·FCP_Safety_Board·drafts_from_2022-2023/SafetyPCB/LordSaveMe/Attempt2.kicad_pcb
About the Attempt2 PCB
Attempt2 is an open source AVR/Arduino PCB design by supermileage, published on GitHub. It is a 2-layer board measuring 63.5 × 63.5 mm, with 51 components from 17 distinct parts.
Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the FT232RL and LM1117IMPX-5.0_NOPB. By type, the board carries 13 resistors, 10 capacitors, 8 connectors, 4 transistors, 4 diodes and 3 ICs.
From the project
FCP Safety Board
Main components on the Attempt2
Attempt2 bill of materials (BOM)
51 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328P-AU | QFP80P900X900X120-32N | IC1 |
| 1 | FT232RL | SOP65P778X200-28N | IC2 |
| 1 | LM1117IMPX-5.0_NOPB | SOT230P700X180-4N | U1 |
| 4 | BCW66GLT1G | SOT95P237X111-3N | Q1, Q2, Q3, Q4 |
| 1 | ECS-160-18-5PX-CKM-TR | ECS49205PXTR | Y1 |
| 4 | 171975-0002 | 1719750002 | J1, J2, J4, J5 |
| 1 | 0430450200 | 43045-0200 | J3 |
| 1 | 2013499-1 | 2013499-1 | J6 |
| 1 | 1719750003 | 171975YY03 | J7 |
| 1 | Header 3X2 | HDR2X3 | P2 |
| 1 | 0678H9100-02 | FUSC9830X318N | F1 |
| 2 | 1422037-2 | 14220372 | K1, K2 |
| 2 | 5-1437565-0 | FSM6JSMATR | S1, S2 |
| 3 | LTST-C191TBKT-5A | LEDC1608X65N | LED3, LED4, LED5 |
| 4 | S1A | DIOM5227X270N | D1, D2, D3, D4 |
| 10 | C0603C104K3RACTU | CAPC1608X95N | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 13 | RC0603DR-07270KL | RESC1608X55N | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
Attempt2 design files
The KiCad project lives in the supermileage/FCP_Safety_Board repository on GitHub; these links point at the commit this page was built from.
Attempt2: common questions
What microcontroller does the Attempt2 use?
The Attempt2 is built around the ATMEGA328P-AU, from the AVR/Arduino family.
How big is the Attempt2 PCB?
The Attempt2 measures 63.5 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Attempt2?
51 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Attempt2 design files?
From the supermileage/FCP_Safety_Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Attempt2 design in my own project?
The repository has no license, so all rights stay with supermileage. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Attempt2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in FCP_Safety_Board
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k