Safety

supermileage·FCP_Safety_Board·drafts_from_2022-2023/SafetyPCB/SafetyPCB.kicad_pcb

Safety PCB layout, top view — open source AVR/Arduino board by supermileage

About the Safety PCB

Safety is an open source AVR/Arduino PCB design by supermileage, published on GitHub. It is a 2-layer board measuring 64.2 × 63.5 mm, with 63 components from 28 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the LM1117IMPX-5.0/NOPB, CH340C and IF-D96F. By type, the board carries 17 capacitors, 14 resistors, 8 connectors, 6 diodes, 4 ICs and 4 transistors.

From the project

FCP Safety Board

Main components on the Safety

Safety bill of materials (BOM)

63 components, 28 distinct parts.

QtyPartRefs
1
ATMEGA328P-AU
IC1
1
LM1117IMPX-5.0/NOPB
~
U1
1
CH340C
U2
1
IF-D96F
U$1
4
BCW66GLT1G
~
Q1, Q2, Q3, Q4
1
ECS-160-18-5PX-CKM-TR
Y1
1
~
J1
3
171975-0002
~
J2, J4, J5
1
0430450200
~
J3
1
USB
J6
1
1719750003
J7
1
Header 3X2
P2
1
~
F1
1
500mA
F2
2
1422037-2
~
K1, K2
2
5-1437565-0
S1, S2
3
LTST-C191TBKT-5A
LED3, LED4, LED5
4
~
D1, D2, D3, D4
1
green
D5
1
orange
D6
Show 8 more
QtyPartRefs
16
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +8
1
10uF
C12
4
RC0603DR-07270KL
~
R1, R2, R3, R4
6
RC0603DR-07270KL
R7, R8, R9, R10, R11, R13
1
RC0603DR-07270KL
R12
1
560 Ohms
R14
1
1.2K
R17
1
1.5K
R18

Safety design files

The KiCad project lives in the supermileage/FCP_Safety_Board repository on GitHub; these links point at the commit this page was built from.

Safety: common questions

What microcontroller does the Safety use?

The Safety is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Safety PCB?

The Safety measures 64.2 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Safety?

63 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Safety design files?

From the supermileage/FCP_Safety_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Safety design in my own project?

The repository has no license, so all rights stay with supermileage. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Safety without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in FCP_Safety_Board

Similar boards