16299-balancing robot

SuperTails·16299-balancing-robot

16299-balancing robot PCB layout, top view — open source AVR/Arduino board by SuperTails

About the 16299-balancing robot PCB

16299-balancing robot is an open source AVR/Arduino PCB design by SuperTails, published on GitHub. It is a 4-layer board measuring 95 × 82 mm, with 43 components from 21 distinct parts.

Its main chip is the Arduino_Nano_RP2040_Connect_Socket, from the AVR/Arduino family. Other key parts include the ROB-14450, IRM-56384, 74HC14, 74LVC2G14 and ARKLED. By type, the board carries 13 connectors, 11 resistors, 7 ICs, 6 diodes, 3 capacitors and 2 switches.

It belongs with the robotics & motion designs in this gallery.

From the project

Control PCB for 16299 at CMU

A submodule is used for some parts, so be sure to clone recursively:

1. Open the schematic editor 2. Open the "edit symbol fields" menu (table icon along the top ribbon) 3. Ensure the settings are as shown below 4. Hit "export".

To generate the gerber files: 1. Open the PCB editor 2. File > Fabrication Outputs > Gerbers (.gbr)... 3. Ensure the settings are as shown below, including... 4. ... Make sure you set your output folder to fab/. 5. Click "Plot"

16299-balancing robot, from the project README
From the project README

Main components on the 16299-balancing robot

ROB-14450IRM-5638474HC1474LVC2G14ARKLEDArduino_Nano_RP2040_Connect_Socket

16299-balancing robot bill of materials (BOM)

43 components, 21 distinct parts.

QtyPartRefs
1
ROB-14450
U1
2
IRM-56384
U3, U4
1
74HC14
U5
1
74LVC2G14
U6
1
ARKLED
U7
1
~
U8
1
Arduino_Nano_RP2040_Connect_Socket
A1
1
Conn_01x04
J1
2
Conn_01x06
J2, J3
1
Conn_01x02
J4
3
Conn_01x22
J5, J6, J7
5
Conn_01x02
J8, J10, J11, J12, J13
1
Conn_01x06
J9
2
SW_Push
SW1, SW2
4
BAT54J
D5, D6, D7, D8
2
IR204A
D9, D10
3
10nF
C5, C6, C7
6
4.7k
R1, R3, R4, R5, R12, R13
2
10k
R2, R10
2
1k
R6, R7
Show 1 more
QtyPartRefs
1
5.6k
R11

16299-balancing robot design files

The KiCad project lives in the SuperTails/16299-balancing-robot repository on GitHub; these links point at the commit this page was built from.

16299-balancing robot: common questions

What microcontroller does the 16299-balancing robot use?

The 16299-balancing robot is built around the Arduino_Nano_RP2040_Connect_Socket, from the AVR/Arduino family.

How big is the 16299-balancing robot PCB?

The 16299-balancing robot measures 95 × 82 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 16299-balancing robot?

43 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the 16299-balancing robot design files?

From the SuperTails/16299-balancing-robot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 16299-balancing robot design in my own project?

The repository has no license, so all rights stay with SuperTails. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 16299-balancing robot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards