UFOControlDeck
Sussex-Invisibles·UFO·HW/Electronics/UFOControlDeck/UFOControlDeck.kicad_pcb
About the UFOControlDeck PCB
UFOControlDeck is an open source FPGA PCB design by Sussex-Invisibles, published on GitHub. It is a 4-layer board measuring 46 × 46 mm, with 104 components from 28 distinct parts.
Its main chip is the ICE40HX8K-BG121, from the FPGA family. Other key parts include the TPSM84209RKHT, LM555xM, ASDMB-xxxMHz, SN74LV1T34DBV and MT25QL128ABA. By type, the board carries 48 capacitors, 31 resistors, 12 diodes, 8 ICs, 4 connectors and 1 inductor.
Main components on the UFOControlDeck
UFOControlDeck bill of materials (BOM)
104 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | TPSM84209RKHT | TPSM84209RKHT | U1, U7, U8 |
| 1 | LM555xM | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ICE40HX8K-BG121 | BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD | U3 |
| 1 | ASDMB-xxxMHz | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U4 |
| 1 | SN74LV1T34DBV | SOT-23-5 | U5 |
| 1 | MT25QL128ABA | DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm | U6 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P1.27mm_Vertical_SMD | J2 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P1.27mm_Vertical | J10 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P1.27mm_Vertical_SMD | J13 |
| 10 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D5, D6, D7, D8, D9, D10, D11 +2 |
| 1 | D_Schottky | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | D_Schottky | D_SOD-123F | D14 |
| 1 | L | L_Taiyo-Yuden_NR-40xx | L1 |
| 6 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 47u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8, C9, C39, C40, C41 |
| 1 | 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 2 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 1 | 50n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 4 | C | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C46, C47, C48 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 28 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16, C17, C18, C19, C20, C21, C22 +20 |
| 14 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R10, R11, R12, R13 +6 |
| 1 | 2.21k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1.37k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 2 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 3 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R14, R15 |
| 9 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R18, R19, R20, R21, R22, R23 +1 |
| 1 | 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
UFOControlDeck design files
The KiCad project lives in the Sussex-Invisibles/UFO repository on GitHub; these links point at the commit this page was built from.
UFOControlDeck: common questions
What microcontroller does the UFOControlDeck use?
The UFOControlDeck is built around the ICE40HX8K-BG121, from the FPGA family.
How big is the UFOControlDeck PCB?
The UFOControlDeck measures 46 × 46 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the UFOControlDeck?
104 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the UFOControlDeck design files?
From the Sussex-Invisibles/UFO repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the UFOControlDeck design in my own project?
The repository has no license, so all rights stay with Sussex-Invisibles. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the UFOControlDeck without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in UFO
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765