40 open source boards using the LM555xM
Real designs built with the LM555xM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tom80
anjennings
135 × 100 mm49 parts2LMIT93Odour stimulator
Sussex-Neuroscience
63 × 110.5 mm50 parts2LGPL-3.06Fault Latch 2
JacobParent7
110 × 90 mm101 parts2LNo license46502 Main Board
acwright
100 × 100 mm34 parts2LCERN-OHL-P-2.03Good Night-7 Segments---ELECTRICAL-ENGINEERING---CRUMB-CIRCUIT-SIMULATOR---and---KiCAD---
Zmc18-Robotics
179.1 × 81.5 mm145 parts2LNo license0FPGA
UFOControlDeck
Sussex-Invisibles
46 × 46 mm104 parts4LNo license0Closed Loop DC Motor Speed Control
Ammar-Bin-Amir
175.8 × 66.1 mm59 parts2LNo license0Solar Tracking System
Ammar-Bin-Amir
149.9 × 58.7 mm37 parts2LNo license0Buck boost converter
sachinp-engineer
99.8 × 61 mm32 parts2LMIT0HeadlightSwitch
RobertPHeller
88.4 × 25.4 mm24 parts2LCC0-1.00ServoTesterBoard
nick1076
70.5 × 41.1 mm24 parts2LNo license0TurnSignal integrated)button
YingK8
24.3 × 35.1 mm21 parts2LCC0-1.00AVR/Arduino
Buck hackathon
Kabilan-Sekar
128.5 × 65.5 mm13 parts2LNo license0- schematic only · 73 partsAVR/Arduino
Concordia
LamdaDev
73 partsNo license0 Spike n hold
BeeHive-org
63 × 110.5 mm55 parts2LMIT13DCA Sensor Unit
DarmorGamz
16.3 × 42 mm33 parts4LCustom license9NXP
Fault Latch 2
LSUTigerRacing
85.8 × 94.2 mm103 parts2LNo license7TurnSignalSwitch
RobertPHeller
88.4 × 25.4 mm21 parts2LCC0-1.00TurnSignal split
YingK8
32.8 × 34.3 mm21 parts2LCC0-1.00PCB 2
sachinp-engineer
52.5 × 38.5 mm14 parts2LMIT0TTSI
JacobParent7
71 × 46 mm32 parts2LNo license4AVR/Arduino
With humiditier
YingK8
89.7 × 114.8 mm43 parts2LNo license0BlinkTaillightBoard
RobertPHeller
88.4 × 25.4 mm20 parts2LCC0-1.00TurnSignal modular
YingK8
30.7 × 49.3 mm20 parts2LCC0-1.00555Board
nick1076
35.8 × 17.7 mm9 parts2LNo license0DD Supply Test 1
Acmex2564
207 × 92.7 mm84 parts2LNo license19BSPD
formulaslug
85 × 65 mm65 parts2LNo license5Simple heart
ApophisXIV
46.3 × 43.2 mm33 parts2LNo license2TurnSignal traced
YingK8
24 × 47.1 mm20 parts2LCC0-1.00RML
JacobParent7
85 × 50 mm25 parts4LNo license4TurnSignal
YingK8
61.4 × 19.6 mm19 parts2LCC0-1.00Output register
ifilot
101.6 × 55.9 mm30 parts2LCERN-OHL-S-2.02BiFlasher
RobertPHeller
19.1 × 25.4 mm10 parts2LCC0-1.0012 24 boost converter
BeeHive-org
45.5 × 48.5 mm17 parts2LMIT13TTSI
LSUTigerRacing
71 × 46 mm32 parts2LNo license7555 astable
ApophisXIV
23.1 × 23.6 mm11 parts2LNo license2
How designs wire the LM555xM
Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the LM555xM connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 20 of 23 designs, most often 10 µF (then 100 nF).
- The CV pin has a capacitor to GND on 19 of 23 designs, most often 10 nF (then 100 nF).
- The TR pin has a capacitor to GND on 16 of 23 designs, most often 100 nF (then 10 nF).
- The DIS pin has a pull-up to 5V on 16 of 23 designs, most often 1 kΩ (then 47 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 96% | — |
| TRpin 2 | Connected to: Signal 96% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| Rpin 4 | Connected to: 5V 83% | — |
| CVpin 5 | Connected to: Signal 83% · not connected 17% |
|
| THRpin 6 | Connected to: Signal 96% |
|
| DISpin 7 | Connected to: Signal 87% |
|
| VCCpin 8 | Connected to: 5V 91% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tom80 by anjennings, 12 24 boost converter by BeeHive-org, DCA Sensor Unit by DarmorGamz and Fault Latch 2 by LSUTigerRacing.
The LM555xM in open source designs
The gallery holds 40 open source boards using the LM555xM from 25 GitHub repositories; a typical one measures about 71 × 48.5 mm and carries around 31 components.
90% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Tom80 by anjennings.
Parts used alongside the LM555xM
Microcontrollers on boards using the LM555xM
What boards using the LM555xM are built for
LM555xM: common questions
Where can I find a LM555xM reference design?
Each of the 40 boards on this page is a real design using the LM555xM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM555xM THR pin connected?
The THR pin has a capacitor to GND on 20 of 23 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 23 open source designs using the LM555xM.
How is the LM555xM CV pin connected?
The CV pin has a capacitor to GND on 19 of 23 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 23 open source designs using the LM555xM.
How is the LM555xM TR pin connected?
The TR pin has a capacitor to GND on 16 of 23 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 23 open source designs using the LM555xM.
What parts are used alongside the LM555xM?
The LM7805_TO220, 74HC00, 641964-1, 74AHC1G08 and 74AHC1G32 appear in the most repositories here.
Which microcontrollers do boards using the LM555xM use?
Most are built on AVR/Arduino (3), FPGA (1) and NXP (1).
How big is a typical board using the LM555xM?
The median is 71 × 48.5 mm, and 90% are two-layer designs.
What is the most popular open source board using the LM555xM?
By GitHub stars, Tom80 by anjennings, with 93 stars.
Can I simulate one of these boards using the LM555xM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.