6 open source boards using the ICE40HX8K-BG121
Real designs built with the ICE40HX8K-BG121, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Pet on a chip
ept221
76.2 × 63.5 mm67 parts4LMIT12FPGA
Base board
nanographs
80 × 49 mm234 parts4L0BSD3FPGA
ICE40DevBoard
ddraig68k
100 × 100 mm211 parts4LNo license0FPGA
UFOControlDeck
Sussex-Invisibles
46 × 46 mm104 parts4LNo license0ESP32
Radianite-Schtick
RadianiteComputers
22 × 65 mm50 parts4LNo license0
How designs wire the ICE40HX8K-BG121
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ICE40HX8K-BG121 connects to, and the resistors, capacitors and other passives placed on it.
- The VPP_FAST pin is left unconnected on 6 of 6 designs.
- The VCC pins have a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF).
- The VCCIO_0 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF).
- The VCCIO_3 pins have a decoupling capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOT_225pin A1 | Connected to: A connector 33% · not connected 17% |
|
| IOT_222pin A2 | Connected to: Signal 83% · not connected 17% |
|
| IOT_223pin A3 | Connected to: A connector 33% · not connected 17% |
|
| IOT_211pin A4 | Connected to: A connector 33% · not connected 17% |
|
| IOT_207pin A5 | Connected to: Signal 67% · not connected 33% |
|
| IOT_206pin A6 | Connected to: Signal 67% · not connected 33% |
|
| IOT_170pin A10 | Connected to: Signal 83% · not connected 17% |
|
| IOT_168pin A11 | Connected to: A connector 33% · not connected 17% |
|
| IOT_221pin B3 | Connected to: Signal 67% · not connected 33% |
|
| IOT_219pin B4 | Connected to: SN74LVC1T45DCKR 33% · not connected 33% |
|
| IOT_208pin B5 | Connected to: Signal 67% · not connected 33% |
|
| IOT_198_GBIN0pin B6 | Connected to: Signal 67% · not connected 33% |
|
| IOT_197_GBIN1pin B7 | Connected to: Signal 67% · not connected 33% |
|
| VPP_FASTpin B10 | Connected to: Not connected 100% | — |
| IOR_161pin B11 | Connected to: A connector 33% · not connected 17% |
|
| GNDPLL1pin C5 | Connected to: GND 50% · a signal 50% |
|
| VCCPLL1pin C6 | Connected to: Signal 67% · VCCPLL1 33% |
|
| IOT_172pin C9 | Connected to: Signal 67% · not connected 33% |
|
| VPP_2V5pin C10 | Connected to: 3.3V 67% · a signal 33% |
|
| IOR_160pin C11 | Connected to: Signal 67% · not connected 33% |
|
| VCCpin D4, D8, H4, H8 | Connected to: 1.2V 100% |
|
| VCCIO_0pin D6 | Connected to: 3.3V 100% |
|
| IOR_147pin D9 | Connected to: Signal 67% · not connected 33% |
|
| IOR_154pin D10 | Connected to: A connector 33% · not connected 17% |
|
| IOR_152pin D11 | Connected to: Signal 83% · not connected 17% |
|
| VCCIO_3pin E4, G4 | Connected to: 3.3V 100% |
|
| GNDpin E5, E6, E7, F5, F6, F7, G5, G6, G7, H5 | Connected to: GND 100% | — |
| IOR_146pin E8 | Connected to: Not connected 50% · a signal 50% |
|
| IOR_144pin E9 | Connected to: Signal 67% · not connected 33% |
|
| IOR_141_GBIN2pin E10 | Connected to: Signal 83% · not connected 17% |
|
| IOR_148pin E11 | Connected to: Signal 83% · not connected 17% |
|
| VCCIO_1pin F8 | Connected to: 3.3V 100% |
|
| IOR_137pin F9 | Connected to: SN74LVC1T45DCKR 33% · not connected 33% |
|
| IOR_136pin F10 | Connected to: A connector 50% |
|
| IOR_140_GBIN3pin F11 | Connected to: Signal 100% |
|
| IOR_118pin G8 | Connected to: Not connected 50% · a signal 50% |
|
| IOR_128pin G9 | Connected to: Not connected 67% · a signal 33% |
|
| VCCIO_2pin H6 | Connected to: 3.3V 100% |
|
| IOB_104_CBSEL1pin H9 | Connected to: BL24C256A-SFRC 33%, CY7C68013A-56LTXC 33% · not connected 33% |
|
| VCCPLL0pin J6 | Connected to: Signal 67% · VCCPLL0 33% |
|
68 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base board by GlasgowEmbedded, Pet on a chip by ept221, Base board by nanographs and ICE40DevBoard by ddraig68k.
The ICE40HX8K-BG121 in open source designs
The gallery holds 6 open source boards using the ICE40HX8K-BG121 from 6 GitHub repositories; a typical one measures about 78.1 × 56.3 mm and carries around 158 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Base board by GlasgowEmbedded.
Parts used alongside the ICE40HX8K-BG121
What boards using the ICE40HX8K-BG121 are built for
ICE40HX8K-BG121: common questions
Where can I find a ICE40HX8K-BG121 reference design?
Each of the 6 boards on this page is a real design using the ICE40HX8K-BG121. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ICE40HX8K-BG121 VPP_FAST pin connected?
The VPP_FAST pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ICE40HX8K-BG121.
What decoupling capacitors do designs use on the ICE40HX8K-BG121 VCC pin?
The VCC pins have a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the ICE40HX8K-BG121.
What decoupling capacitors do designs use on the ICE40HX8K-BG121 VCCIO_0 pin?
The VCCIO_0 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the ICE40HX8K-BG121.
What parts are used alongside the ICE40HX8K-BG121?
The APX811-40UG-7, BL24C256A-SFRC, CY7C68013A-56LTXC, DAC081C081CIMK/NOPB and INA233AIDGSR appear in the most repositories here.
Which microcontrollers do boards using the ICE40HX8K-BG121 use?
Most are built on FPGA (5) and ESP32 (1).
How big is a typical board using the ICE40HX8K-BG121?
The median is 78.1 × 56.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the ICE40HX8K-BG121?
By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.
Can I simulate one of these boards using the ICE40HX8K-BG121 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.