Resume-Projects
sutyazz·Resume-Projects·Wearable_PPG_Sensor_2024/Final_Project_Sutton_Yazzolino/Final_Project_Sutton_Yazzolino.kicad_pcb
About the Resume-Projects PCB
Resume-Projects is an open source Microchip SAM PCB design by sutyazz, published on GitHub. It is a 4-layer board measuring 95 × 95 mm, with 85 components from 31 distinct parts.
Its main chip is the ATSAMD51J20A-A, from the Microchip SAM family. Other key parts include the MAX30102, TMP117 and AP2112K-3.3. By type, the board carries 25 capacitors, 23 resistors, 11 jumpers, 5 test points, 4 ICs and 3 connectors.
It belongs with the sensors and iot & wireless designs in this gallery.
Main components on the Resume-Projects
Resume-Projects bill of materials (BOM)
85 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX30102 | Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U1 |
| 1 | TMP117 | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | ATSAMD51J20A-A | TQFP-64_10x10mm_P0.5mm | U3 |
| 1 | AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | IRLML5203 | SOT-23 | Q1 |
| 1 | 32.768kHz | Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y1 |
| 1 | Micro_SD_Card | microSD_HC_Wuerth_693072010801 | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x10_P1.27mm_Vertical | J3 |
| 1 | Battery | BatteryHolder_TruPower_BH-331P_3xAA | BT1 |
| 3 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | Ie1, USB_D+1, USB_D-1 |
| 11 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +3 |
| 1 | AP130-18Y | SOT-89-3 | LDO1.8V1 |
| 1 | ADP7142ARDZ-3.3 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | LDO3.3V1 |
| 1 | Conn_01x11_Pin | PinHeader_1x11_P2.54mm_Vertical | LEDmodule1 |
| 1 | SW_Push | Panasonic_EVQPUM_EVQPUD | SW1 |
| 5 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP4, TP5, TP6 |
| 1 | Conn_01x12_Pin | PinHeader_1x12_P2.54mm_Vertical | WifiModule1 |
| 1 | MBR1020VL | D_SOD-123F | D2 |
| 1 | FB - 30Ohm | R_0805_2012Metric | FB1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uH | R_0805_2012Metric | L1 |
| 3 | 10uF | CP_Elec_4x3 | C1, C5, C7 |
| 3 | 100nF | R_0805_2012Metric | C2, C4, C6 |
| 1 | 1nF | R_0805_2012Metric | C3 |
| 10 | 0.1uF | R_0805_2012Metric | C8, C9, C10, C11, C12, C14, C15, C23 +2 |
| 4 | 10uF | R_0805_2012Metric | C13, C18, C19, C22 |
| 2 | 15pF | R_0805_2012Metric | C16, C17 |
| 2 | 1uF | R_0805_2012Metric | C20, C21 |
| 21 | 10k | R_0805_2012Metric | R1, R2, R4, R5, R6, R7, R9, R10 +13 |
| 1 | 4.7k | R_0805_2012Metric | R3 |
| 1 | 100K | R_0805_2012Metric | R8 |
Resume-Projects design files
The KiCad project lives in the sutyazz/Resume-Projects repository on GitHub; these links point at the commit this page was built from.
Resume-Projects: common questions
What microcontroller does the Resume-Projects use?
The Resume-Projects is built around the ATSAMD51J20A-A, from the Microchip SAM family.
How big is the Resume-Projects PCB?
The Resume-Projects measures 95 × 95 mm, has 4 copper layers and is 1.769872 mm thick.
How many components are on the Resume-Projects?
85 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Resume-Projects design files?
From the sutyazz/Resume-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Resume-Projects design in my own project?
The repository has no license, so all rights stay with sutyazz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Resume-Projects without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416