11 open source boards using the TMP117

Real designs built with the TMP117, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TMP117

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TMP117 connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 5 kΩ).
  • The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 5 kΩ).
  • The V+ pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
  • The EP pin is left unconnected on 3 of 5 designs (GND on 2).
SCLpin 1Connected to: The microcontroller 50% · VDD 17%
  • Pull-up to 3.3V on 67% · 10 kΩ (2), 5 kΩ (1), 2.2 kΩ (1)
GNDpin 2Connected to: GND 83% · 3.3V 17%
ALERTpin 3Connected to: The microcontroller 67% · not connected 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (2)
V+pin 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 60% · 100 nF (3)
SDApin 6Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 80% · 10 kΩ (2), 5 kΩ (1), 2.2 kΩ (1)
EPpin 7Connected to: Not connected 60% · GND 40%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Satnogs comms by PeakSat, Zeub by crides, Sentinel HYDRA by dhruv1859 and Tensilguard by jayis1.

The TMP117 in open source designs

The gallery holds 11 open source boards using the TMP117 from 7 GitHub repositories; a typical one measures about 100 × 91 mm and carries around 273 components.

82% use four copper layers or more, and 55% carry an open source license.

The most starred is Quantum control by embeddedos-org.

Parts used alongside the TMP117

Microcontrollers on boards using the TMP117

TMP117: common questions

Where can I find a TMP117 reference design?

Each of the 11 boards on this page is a real design using the TMP117. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the TMP117 SCL pin?

The SCL pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 5 kΩ). Counted from the KiCad layouts of 6 open source designs using the TMP117.

What pull-up resistor is used on the TMP117 SDA pin?

The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 5 kΩ). Counted from the KiCad layouts of 6 open source designs using the TMP117.

What decoupling capacitors do designs use on the TMP117 V+ pin?

The V+ pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TMP117.

Which microcontrollers do boards using the TMP117 use?

Most are built on STM32 (6), ESP32 (1), Nordic nRF (1) and RP2040/RP2350 (1).

How big is a typical board using the TMP117?

The median is 100 × 91 mm, and 18% are two-layer designs.

What is the most popular open source board using the TMP117?

By GitHub stars, Quantum control by embeddedos-org, with 8 stars.

Can I simulate one of these boards using the TMP117 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part