Clicky slab

sysangl·clicky-slab·pcb/custom-keyboard.kicad_pcb

Clicky slab PCB layout, top view — open source RP2040/RP2350 board by sysangl

About the Clicky slab PCB

Clicky slab is an open source RP2040/RP2350 PCB design by sysangl, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 343.3 × 125.8 mm, with 123 components from 6 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 86 diodes, 12 fuses, 7 switches, 1 module and 1 LED.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

A custom keyboard that would probably cause a house fire.

The second in the Brick series. Although this one is called a slab cause it's way larger than the other Brick devices.

A custom keyboard that would probably cause a house fire.

Clicky slab, from the project README
From the project README

Main components on the Clicky slab

Clicky slab bill of materials (BOM)

123 components, 6 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
16
SW_PUSH
-1, =1, BCKSPCE1, DEL1, ESC1, N0, N1, N2 +8
12
SW_PUSH
F1, F2, F3, F4, F5, F6, F7, F8 +4
7
SW_PUSH
SW15, SW30, SW45, SW46, SW60, SW73, SW78
1
OLED
OL1
86
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +78

Clicky slab design files

The KiCad project lives in the sysangl/clicky-slab repository on GitHub; these links point at the commit this page was built from.

Clicky slab: common questions

What microcontroller does the Clicky slab use?

The Clicky slab is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Clicky slab PCB?

The Clicky slab measures 343.3 × 125.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Clicky slab?

123 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Clicky slab design files?

From the sysangl/clicky-slab repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Clicky slab design in my own project?

Yes, under the terms of its GPL-3.0 license, which sysangl chose for the repository.

Can I test firmware for the Clicky slab without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards