Tp4056-multicell charger

taguko·tp4056-multicell-charger

Tp4056-multicell charger PCB layout, top view — open source board by taguko

About the Tp4056-multicell charger PCB

Tp4056-multicell charger is an open source PCB design by taguko, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 40 mm, with 14 components from 8 distinct parts.

Other key parts include the TP4056. By type, the board carries 4 capacitors, 3 ICs, 3 connectors and 2 resistors.

It belongs with the power & battery designs in this gallery.

From the project

USB-C charger for small 2S/3S LiPo and Li-ion battery packs using TP4056 module.

A USB Type-C powered charger for small 2S/3S LiPo and Li-ion battery packs.

This project was designed to provide a simple and convenient way to charge small multicell batteries without using a full-featured RC balance charger.

- USB Type-C input - Supports 2S and 3S LiPo / Li-ion battery packs - Independent CC/CV charging for each cell - Approximately 120mA charging current per cell - TP4056-based charging channels - Isolated DC/DC converters for upper cells - No conventional balancing circuit required

Tp4056-multicell charger, from the project README
From the project README

Main components on the Tp4056-multicell charger

Tp4056-multicell charger bill of materials (BOM)

14 components, 8 distinct parts.

QtyPartRefs
3
TP4056
U1, U2, U3
1
USB_C_Receptacle_PowerOnly_6P
J1
1
Conn_01x03
J2
1
Conn_01x04
J3
2
B0505S-1W
PS1, PS2
2
4μ7F/16V
C1, C2
2
10μF/16V
C3, C4
2
5k1Ω
R1, R2

Tp4056-multicell charger design files

The KiCad project lives in the taguko/tp4056-multicell-charger repository on GitHub; these links point at the commit this page was built from.

Tp4056-multicell charger: common questions

How big is the Tp4056-multicell charger PCB?

The Tp4056-multicell charger measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tp4056-multicell charger?

14 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tp4056-multicell charger design files?

From the taguko/tp4056-multicell-charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tp4056-multicell charger design in my own project?

Yes, under the terms of its MIT license, which taguko chose for the repository.

Similar boards