Five Octave - MCU
takayoshiotake·five-octave-61-key-keyboard·electronics/Five_Octave_MCU/Five_Octave_MCU.kicad_pcb
About the Five Octave - MCU PCB
Five Octave - MCU is an open source RP2040/RP2350 PCB design by takayoshiotake, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 28.6 × 28.6 mm, with 33 components from 16 distinct parts.
Its main chip is the Raspberry_Pi_RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q64JVXGIQ and AP2112K-3.3. By type, the board carries 16 capacitors, 8 resistors, 3 ICs, 2 connectors, 2 switches and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
A 61-key (5-octave) keyboard
A 61-key (5-octave) keyboard. Powered by Vial firmware.
MEMO: When pressed individually and released, it becomes the lower right keys (英数 and かな).
MEMO: I couldn't figure out how to achieve 'fn' with adafruithid, so I'm using Karabiner to remap rightoption to 'fn' and using it that way.
RAW data for Keyboard Layout Editor v0.15:
- 🔗 Molex Connector Part Number - 15166-0169 | Molex

Main components on the Five Octave - MCU
Five Octave - MCU bill of materials (BOM)
33 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Raspberry_Pi_RP2040 | RP2040_QFN-56 | U1 |
| 1 | W25Q64JVXGIQ | XSON-8-EP_4x4mm | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HRO_TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 1 | FFC Connector | JUSHUO_AFC01-S16FCC-00 | J2 |
| 2 | Alps_Alpine_SKRP | Tactile_Switch_SKRP_Series | SW1, SW2 |
| 1 | WS2812C-2020-V1 | WS2812C-2020 | LED1 |
| 2 | 30pF | C_0402_1005Metric | C1, C2 |
| 2 | 1uF | C_0402_1005Metric | C3, C4 |
| 10 | 0.1uF | C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C11, C12 +2 |
| 2 | 10uF | C_0402_1005Metric | C15, C16 |
| 2 | 10K | R_0402_1005Metric | R1, R3 |
| 2 | 1K | R_0402_1005Metric | R2, R4 |
| 2 | 27 | R_0402_1005Metric | R5, R6 |
| 2 | 5.1K | R_0402_1005Metric | R7, R8 |
Five Octave - MCU design files
The KiCad project lives in the takayoshiotake/five-octave-61-key-keyboard repository on GitHub; these links point at the commit this page was built from.
Five Octave - MCU: common questions
What microcontroller does the Five Octave - MCU use?
The Five Octave - MCU is built around the Raspberry_Pi_RP2040, from the RP2040/RP2350 family.
How big is the Five Octave - MCU PCB?
The Five Octave - MCU measures 28.6 × 28.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Five Octave - MCU?
33 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Five Octave - MCU design files?
From the takayoshiotake/five-octave-61-key-keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Five Octave - MCU design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which takayoshiotake chose for the repository.
Can I test firmware for the Five Octave - MCU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in five-octave-61-key-keyboard
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k