12 open source boards using the W25Q64JVXGIQ

Real designs built with the W25Q64JVXGIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the W25Q64JVXGIQ

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the W25Q64JVXGIQ connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 47 nF).
  • The CS pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ.
  • The CS pin has a series resistor on 8 of 10 designs, most often 1 kΩ.
CSpin 1Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 80% · 10 kΩ (8)
  • Series resistor on 80% · 1 kΩ (8)
GNDpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (14), 47 nF (3), 2.2 µF (2)
NCpin 9Connected to: Not connected 70% · GND 30%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp micro by siderakb, Chess Card by Hung-Chi970104, RP2040 by Hung-Chi970104 and CTC Ducky - based on RP Micro by challengethecyber.

The W25Q64JVXGIQ in open source designs

The gallery holds 12 open source boards using the W25Q64JVXGIQ from 10 GitHub repositories; a typical one measures about 58.5 × 51 mm and carries around 63 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Rp micro by siderakb.

Microcontrollers on boards using the W25Q64JVXGIQ

W25Q64JVXGIQ: common questions

Where can I find a W25Q64JVXGIQ reference design?

Each of the 12 boards on this page is a real design using the W25Q64JVXGIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q64JVXGIQ VCC pin?

The VCC pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 10 open source designs using the W25Q64JVXGIQ.

What pull-up resistor is used on the W25Q64JVXGIQ CS pin?

The CS pin has a pull-up to 3.3V on 8 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the W25Q64JVXGIQ.

What parts are used alongside the W25Q64JVXGIQ?

The RP2040, AP2112K-3.3, Raspberry_Pi_RP2040, RT6150BGQW and RT9013-33GB appear in the most repositories here.

Which microcontrollers do boards using the W25Q64JVXGIQ use?

Most are built on RP2040/RP2350 (9) and STM32 (3).

How big is a typical board using the W25Q64JVXGIQ?

The median is 58.5 × 51 mm, and 75% are two-layer designs.

What is the most popular open source board using the W25Q64JVXGIQ?

By GitHub stars, Rp micro by siderakb, with 67 stars.

Can I simulate one of these boards using the W25Q64JVXGIQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part