6 open source boards using the Raspberry_Pi_RP2040
Real designs built with the Raspberry_Pi_RP2040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Octave - Input
takayoshiotake
106.8 × 57.2 mm58 parts2LCC-BY-SA-4.04RP2040/RP2350
Power feed manual mill
liorknafo
100 × 100 mm191 parts4LNo license0RP2040/RP2350
Three Octave Sharp
takayoshiotake
228.6 × 92.2 mm107 parts2LCC-BY-SA-4.00RP2040/RP2350
Baker link dev hardware
Baker-link-Lab
21 × 51 mm71 parts4LCERN-OHL-P-2.00RP2040/RP2350
Three Octave #
takayoshiotake
228.6 × 76.2 mm107 parts2LCC-BY-SA-4.00RP2040/RP2350
Five Octave - MCU
takayoshiotake
28.6 × 28.6 mm33 parts2LCC-BY-SA-4.00
How designs wire the Raspberry_Pi_RP2040
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Raspberry_Pi_RP2040 connects to, and the resistors, capacitors and other passives placed on it.
- The IOVDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The XIN pin has a crystal on 5 of 5 designs, most often 12 MHz.
- The XIN pin has a capacitor to GND on 5 of 5 designs, most often 30 pF (then 15 pF).
- The XOUT pin has a series resistor on 5 of 5 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOVDDpin 1, 10, 22, 33, 42, 49 | Connected to: 3.3V 100% |
|
| GPIO0pin 2 | Connected to: Signal 60% · not connected 40% |
|
| GPIO1pin 3 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO3pin 5 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO4pin 6 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO5pin 7 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO6pin 8 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO7pin 9 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO8pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO9pin 12 | Connected to: Not connected 100% | — |
| GPIO10pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO13pin 16 | Connected to: Not connected 80% · a signal 20% | — |
| GPIO15pin 18 | Connected to: Not connected 60% · a signal 40% | — |
| TESTENpin 19 | Connected to: GND 100% | — |
| XINpin 20 | Connected to: Signal 100% |
|
| XOUTpin 21 | Connected to: Signal 100% |
|
| DVDDpin 23, 50 | Connected to: 1.1V 100% |
|
| SWCLKpin 24 | Connected to: Not connected 80% · a signal 20% | — |
| SWDIOpin 25 | Connected to: Not connected 80% · a signal 20% | — |
| RUNpin 26 | Connected to: Signal 100% |
|
| GPIO16pin 27 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO17pin 28 | Connected to: Not connected 60% · a signal 40% | — |
| GPIO19pin 30 | Connected to: Not connected 60% · a signal 40% | — |
| ADC_AVDDpin 43 | Connected to: 3.3V 100% |
|
| VREG_VINpin 44 | Connected to: 3.3V 100% |
|
| VREG_VOUTpin 45 | Connected to: 1.1V 100% |
|
| USB_DMpin 46 | Connected to: Signal 100% |
|
| USB_DPpin 47 | Connected to: Signal 100% |
|
| USB_VDDpin 48 | Connected to: 3.3V 100% |
|
| QSPI_SS_Npin 56 | Connected to: W25Q64JVXGIQ 40% |
|
| GNDpin 57 | Connected to: GND 100% | — |
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Octave - Input by takayoshiotake, Baker link dev hardware by Baker-link-Lab, Power feed manual mill by liorknafo and Five Octave - MCU by takayoshiotake.
The Raspberry_Pi_RP2040 in open source designs
The gallery holds 6 open source boards using the Raspberry_Pi_RP2040 from 5 GitHub repositories; a typical one measures about 103.4 × 66.7 mm and carries around 89 components.
67% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Octave - Input by takayoshiotake.
Parts used alongside the Raspberry_Pi_RP2040
Microcontrollers on boards using the Raspberry_Pi_RP2040
What boards using the Raspberry_Pi_RP2040 are built for
Raspberry_Pi_RP2040: common questions
Where can I find a Raspberry_Pi_RP2040 reference design?
Each of the 6 boards on this page is a real design using the Raspberry_Pi_RP2040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the Raspberry_Pi_RP2040 IOVDD pin?
The IOVDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_RP2040.
How is the Raspberry_Pi_RP2040 XIN pin connected?
The XIN pin has a crystal on 5 of 5 designs, most often 12 MHz. Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_RP2040.
What resistor goes on the Raspberry_Pi_RP2040 XOUT pin?
The XOUT pin has a series resistor on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the Raspberry_Pi_RP2040.
Which microcontrollers do boards using the Raspberry_Pi_RP2040 use?
Most are built on RP2040/RP2350 (6).
How big is a typical board using the Raspberry_Pi_RP2040?
The median is 103.4 × 66.7 mm, and 67% are two-layer designs.
What is the most popular open source board using the Raspberry_Pi_RP2040?
By GitHub stars, Octave - Input by takayoshiotake, with 4 stars.
Can I simulate one of these boards using the Raspberry_Pi_RP2040 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.