Main

takeyamayuki·RCJ_Japan_Soccer2017_Board

Main PCB layout, top view — open source AVR/Arduino board by takeyamayuki

About the Main PCB

Main is an open source AVR/Arduino PCB design by takeyamayuki, published on GitHub under the MIT license. It is a 2-layer board measuring 124 × 181 mm, with 68 components from 24 distinct parts.

Its main chip is the Arduino.MEGA.mini, from the AVR/Arduino family. Other key parts include the TSSP4038, OKI-78SR, TWE_Lite_DIP, HC-SR04 and FXMA108. By type, the board carries 23 ICs, 16 capacitors, 16 resistors, 6 connectors, 4 switches and 2 diodes.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

Board data of Team NTK that competed in RoboCup Junior 2017 Japan Open (RCJJ '17)

This is the Kicad board data of Team NTK that competed in RoboCup Junior 2017 Japan Open.

You can see how the robot works from the following Youtube playlist. https://www.youtube.com/playlist?list=PLkEBRGnKNUILFJv4zKvQkQi69NoT-_FYg

The detailed explanation of the robot can be found in the following blog. https://note.com/spinach_egg/n/n5938fe6f424b

Main, from the project README
From the project README

Main components on the Main

Main bill of materials (BOM)

68 components, 24 distinct parts.

QtyPartRefs
12
TSSP4038
U1, U2, U3, U4, U6, U7, U8, U10 +4
1
OKI-78SR
U5
1
TWE_Lite_DIP
U9
3
HC-SR04
U11, U12, U13
1
FXMA108
U16
1
Arduino.MEGA.mini
U19
1
Pro_micro
U20
3
VNH2SP30
U21, U22, U23
4
CONN_01X02
P1, P4, P5, P6
1
CONN_01X10
P2
1
CONN_01X08
P3
1
Buzzer
SP1
1
SWITCH_INV
SW1
3
SW_PUSH
SW2, SW3, SW4
1
SB340LS
D1
1
LED
D2
12
0.22u
C1, C2, C3, C6, C7, C10, C11, C12 +4
1
220u
C4
1
22u
C5
1
10u
C8
Show 4 more
QtyPartRefs
1
100u
C9
12
10k
R1, R2, R3, R4, R5, R6, R7, R8 +4
3
10k
R12, R14, R15
1
330
R16

Main design files

The KiCad project lives in the takeyamayuki/RCJ_Japan_Soccer2017_Board repository on GitHub; these links point at the commit this page was built from.

Main: common questions

What microcontroller does the Main use?

The Main is built around the Arduino.MEGA.mini, from the AVR/Arduino family.

How big is the Main PCB?

The Main measures 124 × 181 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main?

68 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main design files?

From the takeyamayuki/RCJ_Japan_Soccer2017_Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Main design in my own project?

Yes, under the terms of its MIT license, which takeyamayuki chose for the repository.

Can I test firmware for the Main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RCJ_Japan_Soccer2017_Board

Similar boards