5 open source boards using the VNH2SP30

Real designs built with the VNH2SP30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The VNH2SP30 in open source designs

The gallery holds 5 open source boards using the VNH2SP30 from 3 GitHub repositories; a typical one measures about 212 × 240.5 mm and carries around 68 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Beuty by HrishikeshMRao.

Parts used alongside the VNH2SP30

Microcontrollers on boards using the VNH2SP30

What boards using the VNH2SP30 are built for

VNH2SP30: common questions

Where can I find a VNH2SP30 reference design?

Each of the 5 boards on this page is a real design using the VNH2SP30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the VNH2SP30?

The Arduino.MEGA.mini, HC-SR04 and Pro_micro appear in the most repositories here.

Which microcontrollers do boards using the VNH2SP30 use?

Most are built on AVR/Arduino (3) and STM32 (2).

How big is a typical board using the VNH2SP30?

The median is 212 × 240.5 mm, and 80% are two-layer designs.

What is the most popular open source board using the VNH2SP30?

By GitHub stars, Beuty by HrishikeshMRao, with 2 stars.

Can I simulate one of these boards using the VNH2SP30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part