9 open source boards using the TSSP4038
Real designs built with the TSSP4038, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sdcdmuxemmc
hnz1102
68.3 × 57.8 mm107 parts2LMIT16AVR/Arduino
Main
takeyamayuki
124 × 181 mm68 parts2LMIT0PIC
Laser Arcade Slave
AlexWheelock
76.2 × 50.8 mm36 parts2LNo license1RP2040/RP2350
Ball 2026 v1
Gamu2124
150 × 150 mm56 parts2LNo license0ESP32
Ball V4 32u4
Gamu2124
100.2 × 102.7 mm97 parts2LNo license1OIS L
derdds
40 × 50 mm30 parts2LNo license0BALLSensorV2.1
akihiro-kataoka
99.9 × 99.9 mm18 parts2LNo license0RP2040/RP2350
Ball 2026 v1
Gamu2124
150 × 150 mm56 parts2LNo license1Ballcatch sensor
akihiro-kataoka
28 × 10 mm4 parts2LNo license0
How designs wire the TSSP4038
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TSSP4038 connects to, and the resistors, capacitors and other passives placed on it.
- The VS pin has a decoupling capacitor on 3 of 6 designs, most often 22 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: The microcontroller 50%, a connector 33% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VSpin 3 | Connected to: 5V 67% · a signal 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sdcdmuxemmc by hnz1102, Laser Arcade Slave by AlexWheelock, Ball 2026 v1 by Gamu2124 and Ballcatch sensor by akihiro-kataoka.
The TSSP4038 in open source designs
The gallery holds 9 open source boards using the TSSP4038 from 7 GitHub repositories; a typical one measures about 99.9 × 99.9 mm and carries around 56 components.
100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Sdcdmuxemmc by hnz1102.
Parts used alongside the TSSP4038
Microcontrollers on boards using the TSSP4038
What boards using the TSSP4038 are built for
TSSP4038: common questions
Where can I find a TSSP4038 reference design?
Each of the 9 boards on this page is a real design using the TSSP4038. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TSSP4038 VS pin?
The VS pin has a decoupling capacitor on 3 of 6 designs, most often 22 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the TSSP4038.
Which microcontrollers do boards using the TSSP4038 use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1), ESP32 (1) and PIC (1).
How big is a typical board using the TSSP4038?
The median is 99.9 × 99.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the TSSP4038?
By GitHub stars, Sdcdmuxemmc by hnz1102, with 16 stars.
Can I simulate one of these boards using the TSSP4038 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.