4 open source boards using the OKI-78SR
Real designs built with the OKI-78SR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Esp8266-external temp sensor
theopensourcerer
29.5 × 38.1 mm14 parts2LNo license2NXP
Pheeno robot electronic schematics
ACSLaboratory
114.3 × 114.3 mm70 parts2LBSD-3-Clause1Teletype-180824
mort13
88.9 × 109.9 mm172 parts4LGPL-3.012AVR/Arduino
Main
takeyamayuki
124 × 181 mm68 parts2LMIT0
The OKI-78SR in open source designs
The gallery holds 4 open source boards using the OKI-78SR from 4 GitHub repositories; a typical one measures about 101.6 × 112.1 mm and carries around 69 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Teletype-180824 by mort13.
Microcontrollers on boards using the OKI-78SR
What boards using the OKI-78SR are built for
OKI-78SR: common questions
Where can I find a OKI-78SR reference design?
Each of the 4 boards on this page is a real design using the OKI-78SR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OKI-78SR use?
Most are built on AVR/Arduino (1), ESP8266 (1) and NXP (1).
How big is a typical board using the OKI-78SR?
The median is 101.6 × 112.1 mm, and 75% are two-layer designs.
What is the most popular open source board using the OKI-78SR?
By GitHub stars, Teletype-180824 by mort13, with 12 stars.
Can I simulate one of these boards using the OKI-78SR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.