CelestNavi-HAT-for-ROCK-Pi-S
About the CelestNavi-HAT-for-ROCK-Pi-S
CelestNavi-HAT-for-ROCK-Pi-S is an open source PCB design by takuhoTech, published on GitHub under the MIT license. It is a 4-layer board measuring 43.2 × 43.2 mm, with 60 components from 33 distinct parts.
Other key parts include the BPI-9600, USBLC6-2SC6, MIC5219-3.3YM5, ZED-F9R and NEO-D9C. By type, the board carries 25 resistors, 12 capacitors, 8 diodes, 7 ICs, 4 connectors and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ROCK Pi S CLAS HAT
Main components on the CelestNavi-HAT-for-ROCK-Pi-S
CelestNavi-HAT-for-ROCK-Pi-S bill of materials (BOM)
60 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BPI-9600 | Converter_DCDC_BananaPi_BPI-9600 | U1 |
| 2 | USBLC6-2SC6 | SOT-23-6 | U2, U7 |
| 1 | MIC5219-3.3YM5 | SOT-23-5 | U3 |
| 1 | ZED-F9R | ublox_ZED | U4 |
| 1 | NEO-D9C | ublox_NEO | U5 |
| 1 | PD0922J5050S2HF | Xinger_0805_2012Metric-6_Pad0.33x0.41mm | U6 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | ROCK_Pi_S | ROCK_Pi_S | J1 |
| 2 | GT-USB-7025 | USB_C_Receptacle_G-Switch_GT-USB-7025 | J2, J4 |
| 1 | U.FL-R-SMT-1 | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | MS421R | Battery_Seiko_MS421R | BT1 |
| 4 | CUHS20S30 | D_Toshiba_US2H | D1, D2, D4, D5 |
| 1 | AXGD10402KR | D_Littelfuse_AXGD10402KR_0402_1005Metric_1.02x0.51mm | D3 |
| 1 | C2290 PULSE(WHITE) | LED_0603_1608Metric | D6 |
| 1 | C72038 RTK(YELLOW) | LED_0603_1608Metric | D7 |
| 1 | C2286 PWR(RED) | LED_0603_1608Metric | D8 |
| 1 | LQW18ANR12G80D | L_Murata_LQW18ANxxxx80x_0603_1608Metric_1.65x0.99mm | L1 |
| 2 | 0.1U 0.1u | C_0603_1608Metric | C1, C7 |
| 1 | 470P 470p | C_0603_1608Metric | C2 |
| 1 | 22U 22u | C_0805_2012Metric | C3 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1u | C_0603_1608Metric | C4, C9, C10, C11, C12 |
| 1 | GJM1555C1H470FB01D | C_Murata_xxx15_0402_1005Metric_1.0x0.5mm | C5 |
| 1 | 0.1U 0.1u | C_0402_1005Metric | C6 |
| 1 | 2.2U 2.2u | C_0603_1608Metric | C8 |
| 4 | 5.1K 5.1k | R_0603_1608Metric | R1, R2, R5, R6 |
| 1 | 10 | R_0402_1005Metric | R3 |
| 1 | FC0603E1000BTBT1 | R_Vishay_FC0603xxxxxxTxx_0603_1608Metric_1.626x0.813mm | R4 |
| 9 | 33 | R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13, R14 +1 |
| 3 | 1k | R_0603_1608Metric | R16, R17, R25 |
| 1 | 3.3K 3.3k | R_0603_1608Metric | R18 |
| 2 | 100K 100k | R_0603_1608Metric | R19, R24 |
| 2 | 10K 10k | R_0603_1608Metric | R20, R23 |
| 2 | 47 | R_0603_1608Metric | R21, R22 |
CelestNavi-HAT-for-ROCK-Pi-S design files
The KiCad project lives in the takuhoTech/CelestNavi-HAT-for-ROCK-Pi-S repository on GitHub; these links point at the commit this page was built from.
CelestNavi-HAT-for-ROCK-Pi-S: common questions
How big is the CelestNavi-HAT-for-ROCK-Pi-S?
The CelestNavi-HAT-for-ROCK-Pi-S measures 43.2 × 43.2 mm, has 4 copper layers and is 1.6252 mm thick.
How many components are on the CelestNavi-HAT-for-ROCK-Pi-S?
60 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CelestNavi-HAT-for-ROCK-Pi-S design files?
From the takuhoTech/CelestNavi-HAT-for-ROCK-Pi-S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CelestNavi-HAT-for-ROCK-Pi-S design in my own project?
Yes, under the terms of its MIT license, which takuhoTech chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979