Robotics System Learning Kit
tanai-prathapam·lab2_445L_personal·hw/ECE445L_RSLK_V2/ECE445L_RSLK_V2.kicad_pcb
About the Robotics System Learning Kit PCB
Robotics System Learning Kit is an open source PCB design by tanai-prathapam, published on GitHub. It is a 2-layer board measuring 128.3 × 129.5 mm, with 49 components from 35 distinct parts.
Other key parts include the DRV8847PWPR, LM2937IMP-3.3/NOPB and SSD1306. By type, the board carries 14 connectors, 13 test points, 9 capacitors, 8 resistors, 4 ICs and 1 LED.
It belongs with the robotics & motion designs in this gallery.
From the project
For 319K/445L Lab 6 or 7, use the marked file. Otherwise use ECE445L_Starter.
Main components on the Robotics System Learning Kit
Robotics System Learning Kit bill of materials (BOM)
49 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8847PWPR | SOP65P640X120-17N | U1 |
| 1 | LM2937IMP-3.3/NOPB LM2937IMP-5.0_NOPB | SOT230P700X180-4N | U2 |
| 1 | LM2937IMP-3.3/NOPB LM2937IMP-3.3_NOPB | SOT230P700X180-4N | U3 |
| 1 | SSD1306 https://www.amazon.com/s?k=SSD1306 | SSD1306 | U4 |
| 1 | Bump0 | D2F-01L30-D3_5pin | J1 |
| 1 | Bump1 | D2F-01L30-D3_5pin | J2 |
| 2 | M20-8761042P LaunchPad | LaunchPad | J2_J4, J3_J1 |
| 1 | Bump2 | D2F-01L30-D3_5pin | J3 |
| 1 | Bump3 | D2F-01L30-D3_5pin | J4 |
| 1 | RSLK2 | RSLK_Chassis | J5 |
| 1 | 500SSP1S2M2QEA | 500SSP1S2M2QEA | J6 |
| 1 | XDS_VCC TP10 | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | LP3.3 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | TF-Luna | JST-GH_1x06_1.25mm | J9 |
| 3 | M22-7130342 GP2Y0A41SK0F | SHDR3W50P0X200_1X3_650X240X440P | J11, J12, J13 |
| 1 | +5V | Testpoint_1x02_P2.54mm | TP1 |
| 1 | +7.2V | Testpoint_1x02_P2.54mm | TP2 |
| 1 | GND | Testpoint_1x02_P2.54mm | TP3 |
| 1 | +3.3V | Testpoint_1x02_P2.54mm | TP4 |
| 1 | BAT7.2V | Testpoint_1x1 | TP5 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAT4.8V | Testpoint_1x1 | TP6 |
| 1 | MR+ | Testpoint_1x1 | TP7 |
| 1 | MR- | Testpoint_1x1 | TP8 |
| 1 | ML- | Testpoint_1x1 | TP9 |
| 1 | ML+ | Testpoint_1x1 | TP10 |
| 1 | NFault | Testpoint_1x1 | TP11 |
| 1 | +5V | Testpoint_1x1 | TP12 |
| 1 | GND | Testpoint_1x1 | TP13 |
| 1 | APTD1608LSECK/J3-PF 3.3V | APT1608CGCK | LED1 |
| 8 | TAJB106K020RNJ 10uF | CAPPM3528X210N | C1, C2, C3, C4, C5, C6, C7, C8 |
| 1 | 0.1uF | C_0603_1608Metric | C9 |
| 4 | 10k | R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | 0.1 | R_1206_3216Metric | R5, R6 |
| 1 | 750 | R_0603_1608Metric | R7 |
| 1 | 1.5k | R_0603_1608Metric | R8 |
Robotics System Learning Kit design files
The KiCad project lives in the tanai-prathapam/lab2_445L_personal repository on GitHub; these links point at the commit this page was built from.
Robotics System Learning Kit: common questions
How big is the Robotics System Learning Kit PCB?
The Robotics System Learning Kit measures 128.3 × 129.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robotics System Learning Kit?
49 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Robotics System Learning Kit design files?
From the tanai-prathapam/lab2_445L_personal repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Robotics System Learning Kit design in my own project?
The repository has no license, so all rights stay with tanai-prathapam. Use it as a reference, and ask the author before reusing the design.
More boards in lab2_445L_personal
ECE 319K Baseline Project
tanai-prathapam
114.3 × 88.9 mm40 parts2LNo license0ECE445L Lab6
tanai-prathapam
114.4 × 88.9 mm28 parts2LNo license0- schematic only · 21 parts
MSPM0 Starter
tanai-prathapam
21 parts2LNo license0 ESP8266
ECE 445L Baseline Project
tanai-prathapam
115 × 94 mm16 parts2LNo license0ESP8266
ECE 445L Lab 7
tanai-prathapam
115 × 94 mm14 parts2LNo license0ECE445L Lab2
tanai-prathapam
114.3 × 88.9 mm12 parts2LNo license0ECE445L Lab1
tanai-prathapam
114.3 × 88.9 mm5 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979