7 open source boards using the DRV8847PWPR
Real designs built with the DRV8847PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
McDapBots KiCad TIMSPM0
DavidMe03
128.3 × 158.1 mm79 parts2LNo license3Robotics System Learning Kit
Joshua-Koshy
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
tanai-prathapam
128.3 × 129.5 mm49 parts2LNo license0Robotics System Learning Kit
DylanMeeks
128.3 × 129.5 mm49 parts2LNo license0
How designs wire the DRV8847PWPR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the DRV8847PWPR connects to, and the resistors, capacitors and other passives placed on it.
- The ISEN12 pin has a resistor to GND on 7 of 7 designs, most often 100 mΩ.
- The ISEN34 pin has a resistor to GND on 7 of 7 designs, most often 100 mΩ.
- The VM pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- The NSLEEP pin is tied to 3.3V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NSLEEPpin 1 | Connected to: 3.3V 100% | — |
| ISEN12pin 3 | Connected to: Signal 100% |
|
| ISEN34pin 6 | Connected to: Signal 100% |
|
| TRQpin 11 | Connected to: GND 100% | — |
| VMpin 12 | Connected to: 7.2V 100% |
|
| GNDpin 13 | Connected to: GND 100% | — |
| MODEpin 14 | Connected to: GND 100% | — |
| EPpin 17 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include McDapBots KiCad TIMSPM0 by DavidMe03, Robotics System Learning Kit by DylanMeeks, Robotics System Learning Kit by Joshua-Koshy and Robotics System Learning Kit by tanai-prathapam.
The DRV8847PWPR in open source designs
The gallery holds 7 open source boards using the DRV8847PWPR from 7 GitHub repositories; a typical one measures about 128.3 × 129.5 mm and carries around 49 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is McDapBots KiCad TIMSPM0 by DavidMe03.
Parts used alongside the DRV8847PWPR
What boards using the DRV8847PWPR are built for
DRV8847PWPR: common questions
Where can I find a DRV8847PWPR reference design?
Each of the 7 boards on this page is a real design using the DRV8847PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the DRV8847PWPR ISEN12 pin?
The ISEN12 pin has a resistor to GND on 7 of 7 designs, most often 100 mΩ. Counted from the KiCad layouts of 7 open source designs using the DRV8847PWPR.
What resistor goes on the DRV8847PWPR ISEN34 pin?
The ISEN34 pin has a resistor to GND on 7 of 7 designs, most often 100 mΩ. Counted from the KiCad layouts of 7 open source designs using the DRV8847PWPR.
What decoupling capacitors do designs use on the DRV8847PWPR VM pin?
The VM pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the DRV8847PWPR.
How big is a typical board using the DRV8847PWPR?
The median is 128.3 × 129.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the DRV8847PWPR?
By GitHub stars, McDapBots KiCad TIMSPM0 by DavidMe03, with 3 stars.
Can I simulate one of these boards using the DRV8847PWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.