Cnc hmi usb power
tangentaudio·pico-cnc-hmi·hardware/cnc-hmi-usb-power/cnc-hmi-usb-power.kicad_pcb
About the Cnc hmi usb power PCB
Cnc hmi usb power is an open source PCB design by tangentaudio, published on GitHub. It is a 2-layer board measuring 88.9 × 76.2 mm, with 95 components from 25 distinct parts.
Other key parts include the C7843, TPS2561, TLV71211_SOT23-5, AP2112K-3.3 and IP4234CZ6. By type, the board carries 45 capacitors, 23 resistors, 10 ICs, 6 inductors, 5 connectors and 5 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Raspberry Pi Pico HMI for LinuxCNC using USB Raw HID
Main components on the Cnc hmi usb power
Cnc hmi usb power bill of materials (BOM)
95 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C7843 TUSB4041I | HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.4x4.4mm_ThermalVias | U1 |
| 2 | TPS2561 | VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias | U2, U3 |
| 1 | TLV71211_SOT23-5 | SOT-23-5 | U4 |
| 1 | AP2112K-3.3 | SOT-23-5 | U5 |
| 5 | IP4234CZ6 | SC-74-6_1.55x2.9mm_P0.95mm | U6, U7, U8, U9, U10 |
| 1 | 24MHz | Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering | Y1 |
| 4 | USB_A | USB_A_Kycon_KUSBX-AS1N-B_Horizontal | J1, J2, J3, J4 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J5 |
| 5 | C965555 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5 |
| 6 | 220@100MHz | L_0805_2012Metric | FB1, FB2, FB3, FB4, FB5, FB6 |
| 1 | C1590 0.001uF | C_0603_1608Metric | C1 |
| 1 | C1590 0.1uF | C_0603_1608Metric | C2 |
| 1 | C1712 0.1uF | C_0603_1608Metric | C3 |
| 24 | 0.1uF | C_0603_1608Metric | C4, C5, C7, C8, C10, C11, C13, C14 +16 |
| 4 | 0.001uF | C_0603_1608Metric | C6, C9, C12, C41 |
| 4 | 150uF | CP_Elec_4x3 | C16, C17, C19, C21 |
| 2 | 18pF | C_0603_1608Metric | C23, C24 |
| 5 | 1uF | C_0805_2012Metric | C25, C42, C43, C44, C45 |
| 3 | 10uF | C_0805_2012Metric | C30, C35, C39 |
| 6 | 1M | R_0603_1608Metric | R2, R4, R9, R10, R17, R25 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 4.7K | R_0603_1608Metric | R5, R6, R7, R8, R19, R20, R23, R24 |
| 2 | 25.5K | R_0603_1608Metric | R11, R12 |
| 5 | 10K | R_0603_1608Metric | R13, R14, R15, R16, R22 |
| 1 | 9.53K | R_0603_1608Metric | R18 |
| 1 | 90.9K | R_0603_1608Metric | R21 |
Cnc hmi usb power design files
The KiCad project lives in the tangentaudio/pico-cnc-hmi repository on GitHub; these links point at the commit this page was built from.
Cnc hmi usb power: common questions
How big is the Cnc hmi usb power PCB?
The Cnc hmi usb power measures 88.9 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cnc hmi usb power?
95 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cnc hmi usb power design files?
From the tangentaudio/pico-cnc-hmi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cnc hmi usb power design in my own project?
The repository has no license, so all rights stay with tangentaudio. Use it as a reference, and ask the author before reusing the design.
More boards in pico-cnc-hmi
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979