Control ROV

tdominguezmasciale·Control_ROV·PCB/PCB.kicad_pcb

Control ROV PCB layout, top view — open source Raspberry Pi board by tdominguezmasciale

About the Control ROV PCB

Control ROV is an open source Raspberry Pi PCB design by tdominguezmasciale, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 191.9 × 68.4 mm, with 35 components from 17 distinct parts.

Its main chip is the MODULE_RASPBERRY_PI_4B_4GB, from the Raspberry Pi family. Other key parts include the MCP3208, TRI1-2413, L7805 and MPXA6115A. By type, the board carries 11 connectors, 4 ICs, 4 transistors, 4 relays, 4 diodes and 4 resistors.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

A Flask-based control system for a Raspberry Pi 4 ROV, featuring real-time video streaming, PID depth stabilization, and a web-based telemetry dashboard.

This project implements a local network-controlled ROV system. It features a web-based control interface, real-time video streaming, depth control via PID, and inertial measurement capabilities. The system is built around a Raspberry Pi 4B as the central processing unit. This project can be run without hardware connections for testing purposes.

1. Update System bash sudo apt install python3-full -y sudo apt-get install python3-flask bash sudo apt install build-essential libjpeg-dev imagemagick libv4l-dev git cmake uvcdynctrl -y cd ~ git clone https://github.com/jacksonliam/mjpg-streamer.git…

Control ROV, from the project README
From the project README

Main components on the Control ROV

Control ROV bill of materials (BOM)

35 components, 17 distinct parts.

QtyPartRefs
1
MCP3208
U1
1
TRI1-2413
U2
1
L7805
U3
1
MPXA6115A
U4
4
NPN
Q1, Q2, Q3, Q4
1
Conn_02x20_Odd_Even
J1
7
Conn_01x03_Pin
J2, J4, J5, J6, J13, J14, J16
1
Conn_01x02_Pin
J3
1
Conn_01x04_Pin
J7
1
Conn_01x07_Pin
J15
1
GY-521
ACC1
1
Fuse
F1
4
SANYOU_SRD_Form_C
K1, K4, K5, K6
1
1
V1
4
D
D1, D4, D5, D6
1
C_Polarized
C1
4
R
R1, R2, R3, R4

Control ROV design files

The KiCad project lives in the tdominguezmasciale/Control_ROV repository on GitHub; these links point at the commit this page was built from.

Control ROV: common questions

What microcontroller does the Control ROV use?

The Control ROV is built around the MODULE_RASPBERRY_PI_4B_4GB, from the Raspberry Pi family.

How big is the Control ROV PCB?

The Control ROV measures 191.9 × 68.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control ROV?

35 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Control ROV design files?

From the tdominguezmasciale/Control_ROV repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Control ROV design in my own project?

Yes, under the terms of its GPL-3.0 license, which tdominguezmasciale chose for the repository.

Can I test firmware for the Control ROV without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards