2 open source boards using the MPXA6115A

Real designs built with the MPXA6115A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MPXA6115A in open source designs

The gallery holds 2 open source boards using the MPXA6115A from 2 GitHub repositories; a typical one measures about 176 × 93.2 mm and carries around 167 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Hellen88bmw by rusefi.

Microcontrollers on boards using the MPXA6115A

What boards using the MPXA6115A are built for

MPXA6115A: common questions

Where can I find a MPXA6115A reference design?

Each of the 2 boards on this page is a real design using the MPXA6115A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MPXA6115A use?

Most are built on Raspberry Pi (1).

How big is a typical board using the MPXA6115A?

The median is 176 × 93.2 mm, and 50% are two-layer designs.

What is the most popular open source board using the MPXA6115A?

By GitHub stars, Hellen88bmw by rusefi, with 2 stars.

Can I simulate one of these boards using the MPXA6115A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part