Robot power
Team-robOTTO·PowerBoard·pcb/main-pcb/robot_power.kicad_pcb
About the Robot power PCB
Robot power is an open source NXP PCB design by Team-robOTTO, published on GitHub under the MIT license. It is a 2-layer board measuring 112.4 × 92.1 mm, with 46 components from 15 distinct parts.
Its main chip is the Teensy3.2, from the NXP family. Other key parts include the TLF51801ELV and ACHS-712X. By type, the board carries 12 connectors, 10 capacitors, 9 resistors, 6 ICs, 6 diodes and 3 transistors.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
Bosch 18V Battery-based Power supply for KUKA YouBots
- mechanic: Everything related to mounting of batteries and boards -> FreeCAD - pcb : all schematics for the PCBs -> KICAD - software: Software for the teensy 3.2 on the main PCB
- see exported BOM - 1x 3 pole terminal socket: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01R2-508-03BE?qs=PzGy0jfpSMvsLipzvwxOIA%3D%3D (1x0,60€) - 1x 3 pole terminal plug: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01P1-508-03BE?qs=PzGy0jfpSMsyMkSLNya%2Fkw%3D%3D (1x1,06€)
Main components on the Robot power
Robot power bill of materials (BOM)
46 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLF51801ELV L7805 | TO-220-3_Horizontal_TabDown | U1 |
| 4 | ACHS-712X | SO-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5 |
| 1 | Teensy3.2 | Teensy30_31_32_LC | U6 |
| 3 | Q_PMOS_GDS | TO-220-3_Horizontal_TabDown | Q1, Q2, Q3 |
| 3 | CONN_01X02_FEMALE Conn_01x02_Male | AMASS_XT60-M_1x02_P7.20mm_Vertical | J1, J2, J3 |
| 4 | Conn_01x02_Male | TerminalBlock_bornier-2_P5.08mm | J4, J5, J6, J11 |
| 4 | Conn_01x02_Male | AMASS_XT60-F_1x02_P7.20mm_Vertical | J7, J8, J9, J10 |
| 1 | Conn_01x07_Female | TerminalBlock_bornier-7_P5.08mm | J17 |
| 3 | D | D_5KPW_P12.70mm_Horizontal | D1, D2, D3 |
| 3 | BAT54S | SOT-23 | D6, D7, D8 |
| 8 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5, C7, C8, C9, C10 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 100K R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 8 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 |
Robot power design files
The KiCad project lives in the Team-robOTTO/PowerBoard repository on GitHub; these links point at the commit this page was built from.
Robot power: common questions
What microcontroller does the Robot power use?
The Robot power is built around the Teensy3.2, from the NXP family.
How big is the Robot power PCB?
The Robot power measures 112.4 × 92.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robot power?
46 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robot power design files?
From the Team-robOTTO/PowerBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robot power design in my own project?
Yes, under the terms of its MIT license, which Team-robOTTO chose for the repository.
Can I test firmware for the Robot power without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in PowerBoard
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532