Pcb 15V
Team-robOTTO·PowerBoard·pcb/pcb_15V/pcb_15V/pcb_15V.kicad_pcb
About the Pcb 15V
Pcb 15V is an open source PCB design by Team-robOTTO, published on GitHub under the MIT license. It is a 2-layer board measuring 72.4 × 52.1 mm, with 22 components from 18 distinct parts.
Other key parts include the TLF51801ELV. By type, the board carries 3 connectors, 2 resistors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Bosch 18V Battery-based Power supply for KUKA YouBots
- mechanic: Everything related to mounting of batteries and boards -> FreeCAD - pcb : all schematics for the PCBs -> KICAD - software: Software for the teensy 3.2 on the main PCB
- see exported BOM - 1x 3 pole terminal socket: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01R2-508-03BE?qs=PzGy0jfpSMvsLipzvwxOIA%3D%3D (1x0,60€) - 1x 3 pole terminal plug: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01P1-508-03BE?qs=PzGy0jfpSMsyMkSLNya%2Fkw%3D%3D (1x1,06€)
Main components on the Pcb 15V
Pcb 15V bill of materials (BOM)
22 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLF51801ELV | SOP65P600X170-15N-V2 | U1 |
| 2 | CONN_01X02_FEMALE Conn_01x02_Female | AMASS_XT60-F_1x02_P7.20mm_Vertical | J1, J3 |
| 1 | CONN_01X02_FEMALE Conn_01x03_Male | TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | 270N 270n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CBTS1 |
| 1 | 12P 12p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CCF1 |
| 1 | 15N 15n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CF1 |
| 1 | 470U 470u | CP_Elec_16x17.5 | CIN1 |
| 1 | 22U 22u | C_2220_5650Metric_Pad1.97x5.40mm_HandSolder | CIN2 |
| 2 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CIN3, CIVCC1 |
| 1 | 120P 120p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | CL1 |
| 2 | 100U 100u | CP_Elec_8x11.9 | COUT1, COUT2 |
| 2 | Q_NMOS_GDS | TO-252-3_TabPin2 | Q_HIGH1, Q_LOW1 |
| 1 | 6.65K 6.65k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RF1 |
| 1 | 20K 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RFREQ1 |
| 1 | 1.1K 1.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rsense1 |
| 1 | 5.6UH 5.6uH | L_12x12mm_H8mm | L1 |
| 1 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 8k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Pcb 15V design files
The KiCad project lives in the Team-robOTTO/PowerBoard repository on GitHub; these links point at the commit this page was built from.
Pcb 15V: common questions
How big is the Pcb 15V?
The Pcb 15V measures 72.4 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb 15V?
22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pcb 15V design files?
From the Team-robOTTO/PowerBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pcb 15V design in my own project?
Yes, under the terms of its MIT license, which Team-robOTTO chose for the repository.
More boards in PowerBoard
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k