24V board
Team-robOTTO·PowerBoard·pcb/24V_board/24V_board.kicad_pcb
About the 24V board
24V board is an open source PCB design by Team-robOTTO, published on GitHub under the MIT license. It is a 2-layer board measuring 55.6 × 42.7 mm, with 9 components from 7 distinct parts.
By type, the board carries 2 transistors, 2 resistors and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Bosch 18V Battery-based Power supply for KUKA YouBots
- mechanic: Everything related to mounting of batteries and boards -> FreeCAD - pcb : all schematics for the PCBs -> KICAD - software: Software for the teensy 3.2 on the main PCB
- see exported BOM - 1x 3 pole terminal socket: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01R2-508-03BE?qs=PzGy0jfpSMvsLipzvwxOIA%3D%3D (1x0,60€) - 1x 3 pole terminal plug: https://www.mouser.de/ProductDetail/CUI-Devices/TBP01P1-508-03BE?qs=PzGy0jfpSMsyMkSLNya%2Fkw%3D%3D (1x1,06€)
24V board bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Q_PMOS_GDS | TO-220-3_Horizontal_TabDown | Q1, Q2 |
| 2 | Conn_01x02_Female | AMASS_XT60-F_1x02_P7.20mm_Vertical | ARM1, BASE1 |
| 1 | Conn_01x02_Female | AMASS_XT60-M_1x02_P7.20mm_Vertical | IN1 |
| 1 | Conn_01x02_Female | TerminalBlock_bornier-2_P5.08mm | NOTAUS1 |
| 1 | SW_DIP_x01 | PinHeader_1x02_P2.54mm_Vertical | S1 |
| 1 | 100K 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
24V board design files
The KiCad project lives in the Team-robOTTO/PowerBoard repository on GitHub; these links point at the commit this page was built from.
24V board: common questions
How big is the 24V board?
The 24V board measures 55.6 × 42.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 24V board?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 24V board design files?
From the Team-robOTTO/PowerBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 24V board design in my own project?
Yes, under the terms of its MIT license, which Team-robOTTO chose for the repository.
More boards in PowerBoard
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k