Ikea trotten motorized desk controller
teamon·ikea-trotten-motorized-desk-controller·pcb/desk.kicad_pcb
About the Ikea trotten motorized desk controller PCB
Ikea trotten motorized desk controller is an open source ESP32 PCB design by teamon, published on GitHub. It is a 2-layer board measuring 58.4 × 43.2 mm, with 8 components from 8 distinct parts.
Its main chip is the ESP32_DevKit_V1_DOIT, from the ESP32 family. Other key parts include the DCDC_StepDown_LM2596. By type, the board carries 5 connectors, 2 ICs and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
From the project
Smart controller for an IKEA Trotten desk with automated height adjustment, laser height sensing, and WiFi remote control.
Smart controller for an IKEA Trotten desk with automated height adjustment, laser height sensing, and WiFi remote control.
- MCU: ESP32 (ESP-WROOM-32, USB-C with CH340 UART) - Motor Driver: BTS7960 bidirectional H-bridge with PWM speed control - Height Sensor: VL53L0X laser distance sensor (I2C) - Input: 5 tact switches (1 onboard + 4 external) - Power: LM2596 buck converter (5V)
Main components on the Ikea trotten motorized desk controller
Ikea trotten motorized desk controller bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DCDC_StepDown_LM2596 | DCDC_StepDown_LM2596 | U1 |
| 1 | ESP32_DevKit_V1_DOIT | esp32_devkit_v1_doit | U3 |
| 1 | Conn_01x05_Pin BTN | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin LASER | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x04_Odd_Even BTS | PinHeader_2x04_P2.54mm_Vertical | J4 |
| 1 | Screw_Terminal_01x02 BTS | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J5 |
| 1 | Screw_Terminal_01x02 24V | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | 470uF 35V | CP_Radial_D10.0mm_P5.00mm | C1 |
Ikea trotten motorized desk controller design files
The KiCad project lives in the teamon/ikea-trotten-motorized-desk-controller repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/desk.kicad_pcb
- Schematicpcb/desk.kicad_sch
Ikea trotten motorized desk controller: common questions
What microcontroller does the Ikea trotten motorized desk controller use?
The Ikea trotten motorized desk controller is built around the ESP32_DevKit_V1_DOIT, from the ESP32 family.
How big is the Ikea trotten motorized desk controller PCB?
The Ikea trotten motorized desk controller measures 58.4 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ikea trotten motorized desk controller?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ikea trotten motorized desk controller design files?
From the teamon/ikea-trotten-motorized-desk-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ikea trotten motorized desk controller design in my own project?
The repository has no license, so all rights stay with teamon. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ikea trotten motorized desk controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k