21 open source boards using the ESP32_DevKit_V1_DOIT
Real designs built with the ESP32_DevKit_V1_DOIT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Controller
robhaswell
43.3 × 67.5 mm18 parts2LNo license40ESP32
LoRa-Gateway-E220
ezcGman
65.4 × 63 mm11 parts2LNo license39ESP32
Esprit
r4d10n
38.1 × 52.1 mm25 parts4LNo license5ESP32
0.4
Pierini-Franco
66.7 × 78 mm39 parts2LNo license0ESP32
Makers motor board
Makers-Oakland-University
58 × 76.8 mm13 parts2LNo license0ESP32
LoRa-Gateway-E220
eone78
65.4 × 63 mm11 parts2LNo license0ESP32
Ikea trotten motorized desk controller
teamon
58.4 × 43.2 mm8 parts2LNo license0ESP32
Mtt final
itsmevjnk
423.5 × 392.5 mm757 parts2LNo license39ESP32
LoRa-Gateway-E32
ezcGman
65.4 × 63 mm8 parts2LNo license39ESP32
Ultrasonic speaker
Etienne248
53.8 × 44.9 mm6 parts2LMIT4ESP32
Dispenador AguaESP32
EmersonEE
117.2 × 147.8 mm87 parts2LNo license0ESP32
CaiPad25 ESP32
Luminat3
118 × 88.4 mm18 parts2LNo license0ESP32
Main Board B2023
Falcon-Mauricio
68 × 55 mm14 parts2LNo license0ESP32
LoRa-Gateway-E32
eone78
65.4 × 63 mm8 parts2LNo license0ESP32
ESP32 master
kwiecinski
99.5 × 99.5 mm153 parts2LMIT3ESP32
Main Board B2023 Shield
Falcon-Mauricio
77.6 × 55 mm14 parts2LNo license0ESP32
WIFI RS485 EXPE
nicolasmino
55 × 70 mm8 parts2LNo license0ESP32
Caja-ESP32
EmersonEE
198 × 83 mm78 parts2LNo license0ESP32
Fuente Simetrica
EmersonEE
120.3 × 100 mm74 parts2LNo license0ESP32
ESP32 Trainer V2.0
EmersonEE
100 × 70 mm53 parts2LNo license0ESP32
Dirverless car midle board
NTURacingTeam
115.8 × 48.8 mm14 parts2LNo license4
How designs wire the ESP32_DevKit_V1_DOIT
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the ESP32_DevKit_V1_DOIT connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin is left unconnected on 12 of 15 designs (a signal on 3).
- The SENSOR_VP pin is left unconnected on 12 of 15 designs (a signal on 3).
- The SENSOR_VN pin is left unconnected on 12 of 15 designs (a signal on 3).
- The RXD0/IO3 pin is left unconnected on 11 of 15 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: Not connected 80% · a signal 20% | — |
| SENSOR_VPpin 2 | Connected to: Not connected 80% · a signal 20% | — |
| SENSOR_VNpin 3 | Connected to: Not connected 80% · a signal 20% | — |
| IO34pin 4 | Connected to: Not connected 67% · a signal 33% | — |
| IO35pin 5 | Connected to: Not connected 67% · a signal 33% | — |
| IO12pin 12 | Connected to: Not connected 60% · a signal 40% | — |
| GNDpin 14, 17 | Connected to: GND 77% | — |
| RXD0/IO3pin 27 | Connected to: Not connected 73% · a signal 27% | — |
| TXD0/IO1pin 28 | Connected to: Not connected 73% · a signal 27% | — |
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Controller by robhaswell, LoRa-Gateway-E220 by ezcGman, Mtt final by itsmevjnk and Esprit by r4d10n.
The ESP32_DevKit_V1_DOIT in open source designs
The gallery holds 21 open source boards using the ESP32_DevKit_V1_DOIT from 15 GitHub repositories; a typical one measures about 66.7 × 67.5 mm and carries around 14 components.
95% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Controller by robhaswell.
Parts used alongside the ESP32_DevKit_V1_DOIT
Microcontrollers on boards using the ESP32_DevKit_V1_DOIT
What boards using the ESP32_DevKit_V1_DOIT are built for
ESP32_DevKit_V1_DOIT: common questions
Where can I find a ESP32_DevKit_V1_DOIT reference design?
Each of the 21 boards on this page is a real design using the ESP32_DevKit_V1_DOIT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32_DevKit_V1_DOIT EN pin connected?
The EN pin is left unconnected on 12 of 15 designs (a signal on 3). Counted from the KiCad layouts of 15 open source designs using the ESP32_DevKit_V1_DOIT.
How is the ESP32_DevKit_V1_DOIT SENSOR_VP pin connected?
The SENSOR_VP pin is left unconnected on 12 of 15 designs (a signal on 3). Counted from the KiCad layouts of 15 open source designs using the ESP32_DevKit_V1_DOIT.
How is the ESP32_DevKit_V1_DOIT SENSOR_VN pin connected?
The SENSOR_VN pin is left unconnected on 12 of 15 designs (a signal on 3). Counted from the KiCad layouts of 15 open source designs using the ESP32_DevKit_V1_DOIT.
What parts are used alongside the ESP32_DevKit_V1_DOIT?
The EByte E220-400/900T22S, EByte E32-400/900M20S, PC817 and QuinLED-ESP32-ETH-Hat appear in the most repositories here.
Which microcontrollers do boards using the ESP32_DevKit_V1_DOIT use?
Most are built on ESP32 (21).
How big is a typical board using the ESP32_DevKit_V1_DOIT?
The median is 66.7 × 67.5 mm, and 95% are two-layer designs.
What is the most popular open source board using the ESP32_DevKit_V1_DOIT?
By GitHub stars, Controller by robhaswell, with 40 stars.
Can I simulate one of these boards using the ESP32_DevKit_V1_DOIT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.