Themio
techandpeople·SoftEdIBO·hardware/PCB/node_direct/Themio.kicad_pcb
About the Themio PCB
Themio is an open source ESP32 PCB design by techandpeople, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 75.4 × 79 mm, with 35 components from 19 distinct parts.
Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the ULN2803A and 3297. By type, the board carries 17 connectors, 9 capacitors, 6 ICs and 3 resistors.
It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.
From the project
Soft-based robot platform for inclusive, embodied interaction. Developed at LASIGE, Faculdade de Ciencias, Universidade de Lisboa.
Soft-based robot platform for inclusive, embodied interaction. Developed at LASIGE, Faculdade de Ciencias, Universidade de Lisboa.
SoftEdIBO controls soft robots equipped with inflatable air chambers. Participants interact by touching the robots, which respond through inflation and deflation. The system supports multiple robot types (Turtle, Tree, Thymio) and activity modes.
Main components on the Themio
Themio bill of materials (BOM)
35 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32E Espressif Systems | MODULE_ESP32-DEVKITC-32E | U1 |
| 3 | ~ | XGP6847A_TiagoDias | U2, U3, U4 |
| 1 | ULN2803A STMicroelectronics | UNL | U5 |
| 1 | 3297 Adafruit | MODULE_3297 | U7 |
| 1 | SWR201-NRTN-S04-SA-WH Sullins | SULLINS_SWR201-NRTN-S04-SA-WH | J1 |
| 3 | S2B-XH-A JST | JST_S2B-XH-A | J2, J3, J4 |
| 3 | B2B-XH-A JST Sales America Inc. | JST_B2B-XH-A | J5, J6, J7 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J8 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 4 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J11, J14, J15, J17 |
| 2 | 691137710002 | 691137710002 | J12, J13 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J31 |
| 4 | 0.1µF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C23 |
| 2 | 47µF | CP_Radial_D5.0mm_P2.00mm | C4, C5 |
| 1 | 100µF | CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 10µF | CP_Radial_D5.0mm_P2.00mm | C7 |
| 1 | 1000µF | CP_Radial_D5.0mm_P2.00mm | C8 |
| 2 | 4K7 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 500 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Themio design files
The KiCad project lives in the techandpeople/SoftEdIBO repository on GitHub; these links point at the commit this page was built from.
Themio: common questions
What microcontroller does the Themio use?
The Themio is built around the ESP32-DEVKITC-32E, from the ESP32 family.
How big is the Themio PCB?
The Themio measures 75.4 × 79 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Themio?
35 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Themio design files?
From the techandpeople/SoftEdIBO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Themio design in my own project?
Yes, under the terms of its GPL-3.0 license, which techandpeople chose for the repository.
Can I test firmware for the Themio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in SoftEdIBO
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k