1-PCB PCB Boite noire 2
TekBot-Robotics-Challenge·2025-Team-EPO-Docs·docs/electronique/test2/Kicad/1-PCB_PCB_Boite-noire_2.kicad_pcb
About the 1-PCB PCB Boite noire 2
1-PCB PCB Boite noire 2 is an open source AVR/Arduino PCB design by TekBot-Robotics-Challenge, published on GitHub. It is a 2-layer board measuring 55 × 37 mm, with 11 components from 9 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 crystal and 1 connector.
Main components on the 1-PCB PCB Boite noire 2
1-PCB PCB Boite noire 2 bill of materials (BOM)
11 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA328P-PU | DIP-28_L34.6-W7.3-P2.54-LS10.2-BL | U1 |
| 1 | 16MHz | OSC-TH_L10.0-W4.5-P5.00 | X1 |
| 1 | B4B-PH-SM4-TB (LF)(SN) | CONN-SMD_B4B-PH-SM4-TB-LF-SN | CN1 |
| 1 | Pad_gge1527 | Pad_gge1527 | Pad_gge1527 |
| 1 | Pad_gge1563 | Pad_gge1563 | Pad_gge1563 |
| 2 | 22pF | CAP-TH_L5.5-W4.0-P5.00-D0.5 | C1, C3 |
| 1 | 100nF | CAP-TH_L5.5-W4.0-P5.00-D0.5 | C2 |
| 1 | 10kΩ | RES-TH_BD2.5-L6.5-P10.50-D0.6 | R1 |
| 2 | 4.7kΩ | RES-TH_BD2.5-L6.5-P10.50-D0.6 | R2, R3 |
1-PCB PCB Boite noire 2 design files
The KiCad project lives in the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub; these links point at the commit this page was built from.
1-PCB PCB Boite noire 2: common questions
What microcontroller does the 1-PCB PCB Boite noire 2 use?
The 1-PCB PCB Boite noire 2 is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the 1-PCB PCB Boite noire 2?
The 1-PCB PCB Boite noire 2 measures 55 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 1-PCB PCB Boite noire 2?
11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 1-PCB PCB Boite noire 2 design files?
From the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the 1-PCB PCB Boite noire 2 design in my own project?
The repository has no license, so all rights stay with TekBot-Robotics-Challenge. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 1-PCB PCB Boite noire 2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 2025-Team-EPO-Docs
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k