7SEG
TekBot-Robotics-Challenge·2025-Team-EPO-Docs·docs/electronique/test3/Kicad/7SEG/7SEG.kicad_pcb
About the 7SEG PCB
7SEG is an open source AVR/Arduino PCB design by TekBot-Robotics-Challenge, published on GitHub. It is a 2-layer board measuring 99.7 × 78.4 mm, with 17 components from 14 distinct parts.
Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. By type, the board carries 7 connectors, 3 capacitors, 2 ICs, 2 resistors and 1 crystal.
Main components on the 7SEG
7SEG bill of materials (BOM)
17 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ATMEGA328P-PU MICROCHIP(美国微芯) | DIP-28_L34.6-W7.3-P2.54-LS10.2-BL | U1, U2 |
| 1 | 16MHz YXC(扬兴晶振) | OSC-TH_L10.0-W4.5-P5.00 | X1 |
| 1 | SERVO A null | CONN-TH_3P-P7.62_HEADER3 | P1 |
| 1 | SERVO B null | CONN-TH_3P-P7.62_HEADER3 | P2 |
| 1 | SERVO C null | CONN-TH_3P-P7.62_HEADER3 | P3 |
| 1 | SERVO D null | CONN-TH_3P-P7.62_HEADER3 | P4 |
| 1 | SERVO E null | CONN-TH_3P-P7.62_HEADER3 | P5 |
| 1 | SERVO F null | CONN-TH_3P-P7.62_HEADER3 | P6 |
| 1 | SERVO G null | CONN-TH_3P-P7.62_HEADER3 | P7 |
| 1 | Pad_gge2604 | Pad_gge2604 | Pad_gge2604 |
| 1 | Pad_gge2622 | Pad_gge2622 | Pad_gge2622 |
| 2 | 22pF KNSCHA(科尼盛) | CAP-TH_L5.5-W4.0-P5.00-D0.5 | C1, C3 |
| 1 | 100nF KNSCHA(科尼盛) | CAP-TH_L5.5-W4.0-P5.00-D0.5 | C2 |
| 2 | 10kΩ VISHAY(威世) | RES-TH_BD2.5-L6.5-P10.50-D0.6 | R1, R4 |
7SEG design files
The KiCad project lives in the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub; these links point at the commit this page was built from.
7SEG: common questions
What microcontroller does the 7SEG use?
The 7SEG is built around the ATMEGA328P-PU, from the AVR/Arduino family.
How big is the 7SEG PCB?
The 7SEG measures 99.7 × 78.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 7SEG?
17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 7SEG design files?
From the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 7SEG design in my own project?
The repository has no license, so all rights stay with TekBot-Robotics-Challenge. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 7SEG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in 2025-Team-EPO-Docs
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k