SCH convoyeur 2025-07-12

TekBot-Robotics-Challenge·2025-Team-EPO-Docs·docs/electronique/final/files/SCH_convoyeur_2025-07-12.kicad_pcb

SCH convoyeur 2025-07-12 PCB layout, top view — open source AVR/Arduino board by TekBot-Robotics-Challenge

About the SCH convoyeur 2025-07-12 PCB

SCH convoyeur 2025-07-12 is an open source AVR/Arduino PCB design by TekBot-Robotics-Challenge, published on GitHub. It is a 2-layer board measuring 58 × 39 mm, with 18 components from 15 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the recepteur zone de tri and recepteur presence. By type, the board carries 3 ICs, 3 capacitors, 3 resistors and 1 crystal.

Main components on the SCH convoyeur 2025-07-12

ATMEGA328P-PUrecepteur zone de trirecepteur presence

SCH convoyeur 2025-07-12 bill of materials (BOM)

18 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-PU
MICROCHIP(美国微芯)
U1
1
recepteur zone de tri
Megastar(兆星)
U3
1
recepteur presence
Megastar(兆星)
U4
1
16MHz
YXC(扬兴晶振)
X1
1
laser detction presence
XFCN(兴飞)
H1
1
laser zone de tri
XFCN(兴飞)
H2
1
moteur
XFCN(兴飞)
H3
1
capteur de couleur
XFCN(兴飞)
H4
1
esp01S
XKB Connectivity(中国星坤)
H5
1
Pad_gge2154
Pad_gge2154
1
Pad_gge2184
Pad_gge2184
1
Pad_gge2229
Pad_gge2229
2
22pF
KNSCHA(科尼盛)
C1, C3
1
100nF
KNSCHA(科尼盛)
C2
3
10kΩ
VISHAY(威世)
R1, R2, R3

SCH convoyeur 2025-07-12 design files

The KiCad project lives in the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub; these links point at the commit this page was built from.

SCH convoyeur 2025-07-12: common questions

What microcontroller does the SCH convoyeur 2025-07-12 use?

The SCH convoyeur 2025-07-12 is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the SCH convoyeur 2025-07-12 PCB?

The SCH convoyeur 2025-07-12 measures 58 × 39 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SCH convoyeur 2025-07-12?

18 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SCH convoyeur 2025-07-12 design files?

From the TekBot-Robotics-Challenge/2025-Team-EPO-Docs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SCH convoyeur 2025-07-12 design in my own project?

The repository has no license, so all rights stay with TekBot-Robotics-Challenge. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SCH convoyeur 2025-07-12 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in 2025-Team-EPO-Docs

Similar boards