Glider
About the Glider PCB
Glider is an open source PCB design by telec16, published on GitHub. It is a 2-layer board measuring 25 × 200 mm, with 29 components from 16 distinct parts.
Other key parts include the TL082. By type, the board carries 6 diodes, 6 resistors, 5 connectors, 4 switches, 4 capacitors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
~~Little side project, don't expect much updates.~~
~~Little side project, don't expect much updates.~~
VCO - 3340 - Schmitt inverter - Opamp V1 - Opamp V2 LFO - Hex Inverter Sequencer - µC - random jazz generator Random generator - zener - µC ADSR - Opamp VCA - LM13700 - Vactrol Quantizer (CV correction) - µC VCF - ? Drum kit - ??? Frequency multiplier/divider - CD4046 PLL V1 - CD4046 PLL V2 Wavefolder - Bipolar - Opamp CV Glider - RC circuit * Scope - µC
Main components on the Glider
Glider bill of materials (BOM)
29 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL082 | DIP-8_W7.62mm_LongPads | U1, U2 |
| 1 | EuroPower | EuroPower | J1 |
| 1 | OUT1 | Jack_Hole_Square | J2 |
| 1 | IN1 | Jack_Hole_Square | J3 |
| 1 | OUT2 | Jack_Hole_Square | J4 |
| 1 | IN2 | Jack_Hole_Square | J5 |
| 2 | 1M | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2 |
| 2 | LIN/LOG | SW_L13.2mm_W7.9mm_P4.7mm | SW1, SW3 |
| 2 | UP/DOWN | SW_L13.2mm_W7.9mm_P4.7mm | SW2, SW4 |
| 2 | LED | LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D1, D4 |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D5, D6 |
| 2 | 100n | C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 470n | C_Disc_D7.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | 2k2 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R4 |
| 2 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R5 |
| 2 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R6 |
Glider design files
The KiCad project lives in the telec16/modular-synth repository on GitHub; these links point at the commit this page was built from.
- LayoutGlider/Glider.kicad_pcb
Glider: common questions
How big is the Glider PCB?
The Glider measures 25 × 200 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Glider?
29 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Glider design files?
From the telec16/modular-synth repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Glider design in my own project?
The repository has no license, so all rights stay with telec16. Use it as a reference, and ask the author before reusing the design.
More boards in modular-synth
Random Jazz Generator
167.8 × 200.6 mm126 parts2LNo license16
AVR/ArduinoLights
50 × 200 mm115 parts2LNo license16
AVR/ArduinoLights back
50 × 174 mm99 parts2LNo license16
VCO
50 × 200 mm87 parts2LNo license16
PLL
50 × 200 mm78 parts2LNo license16
Wavefolder
25 × 200 mm56 parts2LNo license16
VCA
40 × 200 mm54 parts2LNo license16
ADSR
25 × 200 mm49 parts2LNo license16
PICScope
30 × 200 mm46 parts2LNo license16
AVR/ArduinoQuantizer
25 × 200 mm38 parts2LNo license16
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687