LineSensor
Tellurnoid·newLine·KiCad/過去データ/ノード/LineSensor_Prot5/LineSensor.kicad_pcb
About the LineSensor PCB
LineSensor is an open source AVR/Arduino PCB design by Tellurnoid, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 109 components from 14 distinct parts.
Its main chip is the ARDUINO_NANO_V2.X, from the AVR/Arduino family. Other key parts include the LM393. By type, the board carries 53 resistors, 17 transistors, 16 diodes, 10 capacitors, 8 ICs and 2 connectors.
Main components on the LineSensor
LineSensor bill of materials (BOM)
109 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5, U6, U7, U8, U9 |
| 1 | ARDUINO_NANO_V2.X Arduino_Nano_v2.x | Arduino_Nano | A1 |
| 16 | Q_Photo_NPN | NJL7502R | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +8 |
| 1 | NMOS | TO-251-3-1EP_Horizontal_TabDown | Q17 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | R_Potentiometer_Trim | 名称未設定 | RV1 |
| 1 | SW_DPST_X2 SW_DPST_x2 | PinSocket_1x03_P2.54mm_Vertical | SW2 |
| 16 | LED | LED_0603_1608Metric | D34, D35, D36, D37, D38, D39, D40, D41 +8 |
| 1 | C | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | C | C_Disc_D7.5mm_W2.5mm_P5.00mm | C3 |
| 8 | C | C_0603_1608Metric | C4, C5, C6, C7, C8, C9, C10, C11 |
| 48 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +40 |
| 5 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R49, R50, R51, R84, R85 |
LineSensor design files
The KiCad project lives in the Tellurnoid/newLine repository on GitHub; these links point at the commit this page was built from.
LineSensor: common questions
What microcontroller does the LineSensor use?
The LineSensor is built around the ARDUINO_NANO_V2.X, from the AVR/Arduino family.
How big is the LineSensor PCB?
The LineSensor measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LineSensor?
109 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LineSensor design files?
From the Tellurnoid/newLine repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LineSensor design in my own project?
The repository has no license, so all rights stay with Tellurnoid. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the LineSensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in newLine
RP2040/RP2350
Prot4
Tellurnoid
140 × 140 mm213 parts2LNo license0RP2040/RP2350
Prot3
Tellurnoid
140 × 140 mm197 parts2LNo license0Linesensor Japan prot2
Tellurnoid
139.9 × 140 mm141 parts2LNo license0LineSensor Block prot2
Tellurnoid
100 × 100 mm72 parts2LNo license0RP2040/RP2350
Prot2
Tellurnoid
140 × 140 mm65 parts2LNo license0RP2040/RP2350
EchoBoard
Tellurnoid
100 × 100 mm28 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k