Prot4

Tellurnoid·newLine·KiCad/prot4/ネット減らしたい/prot4(カクカク配線修正前)/prot4.kicad_pcb

Prot4 PCB layout, top view — open source RP2040/RP2350 board by Tellurnoid

About the Prot4 PCB

Prot4 is an open source RP2040/RP2350 PCB design by Tellurnoid, published on GitHub. It is a 2-layer board measuring 140 × 140 mm, with 213 components from 14 distinct parts.

Its main chip is the RP2040_zero_kimoi3, from the RP2040/RP2350 family. Other key parts include the LM393. By type, the board carries 33 diodes, 32 transistors, 26 capacitors, 16 ICs, 3 connectors and 1 speaker.

Main components on the Prot4

Prot4 bill of materials (BOM)

213 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
LM393
U1, U2, U3, U4, U5, U6, U7, U8 +8
32
Q_Photo_NPN
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +24
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J1
1
LED_SW
J2
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J3
98
R
B1, B2, Rca1, Rca2, Rca3, Rca4, Rca5, Rca6 +90
1
Speaker_Crystal
LS1
2
~
RP2040_Zero1, RP2040_Zero2
1
R_Potentiometer_Trim
RV1
32
LED
D1, D2, D3, D4, D5, D6, D7, D8 +24
1
D_Schottky
D33
25
C
C1, C2, C3, C4, C5, C6, C7, C8 +17
1
C
C24
1
R
R1

Prot4 design files

The KiCad project lives in the Tellurnoid/newLine repository on GitHub; these links point at the commit this page was built from.

Prot4: common questions

What microcontroller does the Prot4 use?

The Prot4 is built around the RP2040_zero_kimoi3, from the RP2040/RP2350 family.

How big is the Prot4 PCB?

The Prot4 measures 140 × 140 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Prot4?

213 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Prot4 design files?

From the Tellurnoid/newLine repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Prot4 design in my own project?

The repository has no license, so all rights stay with Tellurnoid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Prot4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in newLine

Similar boards