HardLabs

Servo regulator

teostefan·WRO-2025-Future-Engineers-Canada·pcb/servo_regulator/servo_regulator.kicad_pcb

Servo regulator PCB layout, top view — open source board by teostefan

About the Servo regulator PCB

Servo regulator is an open source PCB design by teostefan, published on GitHub. It is a 2-layer board measuring 10.5 × 21 mm, with 6 components from 6 distinct parts.

Other key parts include the LM7805_TO220. By type, the board carries 3 capacitors, 2 connectors and 1 IC.

It belongs with the robotics & motion, sensors and dev boards & breakouts designs in this gallery.

From the project

Main repository for the joint uOttawa-CarletonU team competing in the WRO Future Engineers 2025 competition.

The following repository contains the code and technical documentation regarding the robot created by the CarletonU-uOttawa joint team for the 2025 WRO Future Engineers competition.

- About our Team - Demo Video - Software Setup - Power and Sensor Management - Obstacle Management - Mobility Management

Oscar Barbieri is a student at the University of Ottawa and is studying software engineering, and Stefan Teodorescu is a student a Carleton University studying aerospace avionics. Last year, Oscar and Stefan participated in the WRO Future Innovators challenge and made it into the international…

Servo regulator, from the project README
From the project README

Main components on the Servo regulator

LM7805_TO220

Servo regulator bill of materials (BOM)

6 components, 6 distinct parts.

QtyPartRefs
1
LM7805_TO220
U1
1
IN
J1
1
OUT
J2
1
0.33uF
C1
1
0.1uF
C2
1
100uF
C3

Servo regulator design files

The KiCad project lives in the teostefan/WRO-2025-Future-Engineers-Canada repository on GitHub; these links point at the commit this page was built from.

Servo regulator: common questions

How big is the Servo regulator PCB?

The Servo regulator measures 10.5 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Servo regulator?

6 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Servo regulator design files?

From the teostefan/WRO-2025-Future-Engineers-Canada repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Servo regulator design in my own project?

The repository has no license, so all rights stay with teostefan. Use it as a reference, and ask the author before reusing the design.

More boards in WRO-2025-Future-Engineers-Canada

Similar boards