Zephyr ci shield

teslabs·zephyr-ci-shield

Zephyr ci shield layout, top view — open source board by teslabs

About the Zephyr ci shield

Zephyr ci shield is an open source PCB design by teslabs, published on GitHub under the MIT license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 23 components from 12 distinct parts.

Other key parts include the LM75B and 24LC256. By type, the board carries 12 resistors, 5 connectors, 3 capacitors, 2 ICs and 1 switch.

It belongs with the dev boards & breakouts and sensors designs in this gallery.

From the project

Zephyr CI Test Shield

This repository contains the board design files for the Zephyr CI Test Shield. This board is a clone of the ARM mbed CI test shield.

KiCad (5.x) schematic and board files Part numbers for JLCPCB assembly (only SMD parts) Part numbers from Mouser For every revision: - Schematic PDF - GERBER files - BOM and assembly files for JLCPCB - Interactive HTML BOM

Arduino R3 shield format microSD card slot to test SPI Resistor star network to test ADC EEPROM and temperature sensor to test I2C, EEPROM drivers and sensor drivers Loopback pins to test digital inputs, outputs, interrupts, PWM... Multiple…

Zephyr ci shield, from the project README
From the project README

Main components on the Zephyr ci shield

Zephyr ci shield bill of materials (BOM)

23 components, 12 distinct parts.

QtyPartRefs
1
LM75B
U1
1
24LC256
U2
1
Micro_SD_Card
J1
1
CN1
J2
1
CN2
J3
1
CN4
J4
1
CN3
J5
1
RESET
SW1
3
100nF
C1, C2, C3
6
10K
R1, R2, R3, R4, R5, R6
4
0
R7, R8, R9, R10
2
4.7K
R11, R12

Zephyr ci shield design files

The KiCad project lives in the teslabs/zephyr-ci-shield repository on GitHub; these links point at the commit this page was built from.

Zephyr ci shield: common questions

How big is the Zephyr ci shield?

The Zephyr ci shield measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zephyr ci shield?

23 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Zephyr ci shield design files?

From the teslabs/zephyr-ci-shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Zephyr ci shield design in my own project?

Yes, under the terms of its MIT license, which teslabs chose for the repository.

Similar boards